Hi , I seem to hit a wall at 4.67 (133 x 35). If i use a slower multiplyer, say 24 and crank up the blck. I still cant go past 4.7GHz. Im running BIOS Ver 1401. I can get into windows 7 with a higher multiplyer but when i push my system with prime95 - it crashes. My temps are in the 50's when pushed at 4.6GHz. I'm using the followning settings.....

CPU Core , QPI/Dram and CPU PLL are set to 1.55
Ram is 1600 @ 1.65 Volts with 9/9/9/24 - 2T
Load Line set to full
Disabled both Spread Spectrum
Disabled C1E, Virtual Tech, CPU TM, A20m, C-State and Speedstep

Everything else is default and/or Auto

I would like to keep all cores on.

Are there any other settings i need to set for stability?
Do I just need to run more voltage?

For the people that use LN2 🙂 Do you do anyting in the BIOS other then just raw voltage?

Thanks