08-11-2011 12:55 PM - last edited on 03-05-2024 08:07 PM by ROGBot
08-11-2011 01:01 PM
08-11-2011 02:43 PM
voicesurfr wrote:
Hi , I seem to hit a wall at 4.67 (133 x 35). If i use a slower multiplyer, say 24 and crank up the blck. I still cant go past 4.7GHz. Im running BIOS Ver 1401. I can get into windows 7 with a higher multiplyer but when i push my system with prime95 - it crashes. My temps are in the 50's when pushed at 4.6GHz. I'm using the followning settings.....
CPU Core , QPI/Dram and CPU PLL are set to 1.55
Ram is 1600 @ 1.65 Volts with 9/9/9/24 - 2T
Load Line set to full
Disabled both Spread Spectrum
Disabled C1E, Virtual Tech, CPU TM, A20m, C-State and Speedstep
Everything else is default and/or Auto
I would like to keep all cores on.
Are there any other settings i need to set for stability?
Do I just need to run more voltage?
For the people that use LN2 🙂 Do you do anyting in the BIOS other then just raw voltage?
Thanks
08-11-2011 02:43 PM
08-11-2011 08:50 PM