- last edited on by
ROGBot
Hello my name is Richard aka Kier
I'm an enthusiastic modder from the Netherlands
This is my first post overhere, and hope you like my skills
more of my builds you can find at http://www.madebykier.com
Sponsored by:
To much time and a little addicted………………… this gives me the opportunity to start another build
This time the great Corsair Graphite 600T. Love this case, nice shape and good quality
The hardware i’m gonna use:
Case: Corsair Graphite 600T
Motherboard: Asrock Z68 extreme 4
CPU: i5 2500K
GPU: Asus GTX 580
PSU: Coolermaster Silent pro M 1000W
And more………………this will been shown in the progress
Offcourse there wil be watercooling
The case is given by IT-Service
Corsair Grapithe 600T
Out of the box
Ofcourse right away disassembling the Corsair
Taken off the front
There is a plastic rim on the front which also came off, maybe i'm gonna do something with it
Back is removable also
And the top
Nice panel
And the case without the plastic
Oww almost forgot, the hdd racks are easily removable
Almost nothing left
First modification. For this i've used 3M Di-Noc CARBON FIBER FILM
3M Di-Noc CARBON FIBER FILM
First done the control panel and the narrow strips on the sides
After that did one sidepanel with the carbon film
For now this was the start, more to come when I have some more hardware
Grtz.
I'm an enthusiastic modder from the Netherlands
This is my first post overhere, and hope you like my skills
more of my builds you can find at http://www.madebykier.com
Sponsored by:
To much time and a little addicted………………… this gives me the opportunity to start another build
This time the great Corsair Graphite 600T. Love this case, nice shape and good quality
The hardware i’m gonna use:
Case: Corsair Graphite 600T
Motherboard: Asrock Z68 extreme 4
CPU: i5 2500K
GPU: Asus GTX 580
PSU: Coolermaster Silent pro M 1000W
And more………………this will been shown in the progress
Offcourse there wil be watercooling
The case is given by IT-Service
Corsair Grapithe 600T
Out of the box
Ofcourse right away disassembling the Corsair
Taken off the front
There is a plastic rim on the front which also came off, maybe i'm gonna do something with it
Back is removable also
And the top
Nice panel
And the case without the plastic
Oww almost forgot, the hdd racks are easily removable
Almost nothing left
First modification. For this i've used 3M Di-Noc CARBON FIBER FILM
3M Di-Noc CARBON FIBER FILM
First done the control panel and the narrow strips on the sides
After that did one sidepanel with the carbon film
For now this was the start, more to come when I have some more hardware
Grtz.
Hi, my modding friends
Did some nice things to the 600T
For this I have 2 Black Ice GT Stealth 240 rads
And Coolermaster has given me 4 very good fans. The Turbine Master Mach 0.8
I'm going to place 2 of these on top of the 600T
Need to take of the cap for the mesh panel otherwise it don't fit
Beneed the Turbine masters I am gonna place 1 black ice rad
The other two turbine nasters are coming in the front
Going to place the second rad inside
It dont fit, so have to cut a piece out of the bay
Back to the top again. I think it's not finished..............so it's acryl time
For this IT-service has send me a beautiful piece of 5mm UV blue acryl
Marked for cutting
And cut it
Cut the little pieces out
Still need to file this
And it fits
Mesh cover placed
Next step, marked the fans
Did the cutting with my hightech fretsaw
Without the tape. Hmm looks like .....................
And placed the Turbine masters
The idea is to past black film over the acryl with blue lines visible
Last week a received a very nice package from IT-Service
Thanks Eddy's 😉
First the great motherboard: The ASRock Z68 Extreme4
Two kits Corsair 4 GB DDR3-1600 Kit
and the beautiful Intel® Core™ i5-2500K
The big ASUS ENGTX580 DCII/2DIS/1536MD5
And a nice Sony Optiarc AD-5260S-0B
I'm not only showing you good products but have also done some work
The front. I want to give the same looks as the top, with acryl and 2 CM fans.
The plastic front
Here I have cut away the middle bar
Sawn a piece of 5mm blue acryl
And again the same as the top..........sawn the two fans
Made the slot for the dvd
Removed the tape
But we're not there yet, transparent is not what I want. That's why I have used black film to make small borders, later on with light
Paste tape again
Now I have cut out a 5mm line
Removed all the tape
Between the DVD and the fan is coming a bay reservoir with the blue acrylic as res window
Did some nice things to the 600T
For this I have 2 Black Ice GT Stealth 240 rads
And Coolermaster has given me 4 very good fans. The Turbine Master Mach 0.8
I'm going to place 2 of these on top of the 600T
Need to take of the cap for the mesh panel otherwise it don't fit
Beneed the Turbine masters I am gonna place 1 black ice rad
The other two turbine nasters are coming in the front
Going to place the second rad inside
It dont fit, so have to cut a piece out of the bay
Back to the top again. I think it's not finished..............so it's acryl time
For this IT-service has send me a beautiful piece of 5mm UV blue acryl
Marked for cutting
And cut it
Cut the little pieces out
Still need to file this
And it fits
Mesh cover placed
Next step, marked the fans
Did the cutting with my hightech fretsaw
Without the tape. Hmm looks like .....................
And placed the Turbine masters
The idea is to past black film over the acryl with blue lines visible
Last week a received a very nice package from IT-Service
Thanks Eddy's 😉
First the great motherboard: The ASRock Z68 Extreme4
Two kits Corsair 4 GB DDR3-1600 Kit
and the beautiful Intel® Core™ i5-2500K
The big ASUS ENGTX580 DCII/2DIS/1536MD5
And a nice Sony Optiarc AD-5260S-0B
I'm not only showing you good products but have also done some work
The front. I want to give the same looks as the top, with acryl and 2 CM fans.
The plastic front
Here I have cut away the middle bar
Sawn a piece of 5mm blue acryl
And again the same as the top..........sawn the two fans
Made the slot for the dvd
Removed the tape
But we're not there yet, transparent is not what I want. That's why I have used black film to make small borders, later on with light
Paste tape again
Now I have cut out a 5mm line
Removed all the tape
Between the DVD and the fan is coming a bay reservoir with the blue acrylic as res window
Update !!!
Did my first cutting in the 600T this week
The 2 fans in the front
And the slot for the in/ outlet radiator
Also drawn the top fans
And after some dremel power
Also past black film on the top acryl
And slide out the same lines as the front panel
Put everything together
The fans in the front
And the outlet from the rad with just enough space to put the fittings in
The 600T how it's gonna be
Bay res update !!!
Today I've received my BP reservoir. Nice and small
Removed the acryl window from the reservoir and marked the holes for the M4 bolds
Perfect fit 😉
Cut the lines out of the black film. Same shape as the internal from the res
And placed it
I've did some modding for the midplate. bend two angels in a mesh panel.
For the side of the midplate I've sawn a piece of 5mm transparant acryl
And another piece 5mm blue acryl
Just two pics of the big big Asus
Back to the transaprant acryl, past black film on it
Cut out the outline
And past 3m Carbon on the smaller plate
And put the both together
Cut also the outline from the smaller blue acryl
Also sawn and bend a piece of aluminium for the side from the radiator
Placed like this
And the last thing I did is a piece of aluminium for the drive bay side
All together
That's it............see you soon 😉
Did my first cutting in the 600T this week
The 2 fans in the front
And the slot for the in/ outlet radiator
Also drawn the top fans
And after some dremel power
Also past black film on the top acryl
And slide out the same lines as the front panel
Put everything together
The fans in the front
And the outlet from the rad with just enough space to put the fittings in
The 600T how it's gonna be
Bay res update !!!
Today I've received my BP reservoir. Nice and small
Removed the acryl window from the reservoir and marked the holes for the M4 bolds
Perfect fit 😉
Cut the lines out of the black film. Same shape as the internal from the res
And placed it
I've did some modding for the midplate. bend two angels in a mesh panel.
For the side of the midplate I've sawn a piece of 5mm transparant acryl
And another piece 5mm blue acryl
Just two pics of the big big Asus
Back to the transaprant acryl, past black film on it
Cut out the outline
And past 3m Carbon on the smaller plate
And put the both together
Cut also the outline from the smaller blue acryl
Also sawn and bend a piece of aluminium for the side from the radiator
Placed like this
And the last thing I did is a piece of aluminium for the drive bay side
All together
That's it............see you soon 😉
These taped acryl looks awesome!!
