07-09-2013 09:48 PM - last edited on 03-06-2024 08:36 PM by ROGBot
07-09-2013 09:51 PM
07-10-2013 12:43 AM
07-10-2013 01:44 AM
07-10-2013 09:03 AM
07-10-2013 10:02 AM
MadaoROG wrote:
I would much prefer an ek titan block over the hydro copper. Is the hydro copper supposed to be better for cooling?
I'm not going to sli this rig. It's only going to have one gtx 780.
Is there something wrong with the lamptron fc8 that I posted? I don't need the fan controller to have speed control for the pump. The pump itself has speed control.
07-10-2013 11:22 AM
Zeruel wrote:
Hydro Copper has warranty and I think is also has warranty if you change the block on the Hyrdo Copper. Regular Cards have their warranty voided, but its all on you. Make sure you test the reference card first, do all the testing with the stock cooler then once you know it is 100% working then put on a water block.
07-10-2013 09:12 AM
07-10-2013 11:21 AM
kkn wrote:
if its bether then the other im not shure, i was aiming at price, and mabye just in case damage when you pull the stock cooler off.
the controller i posted, you have the option to monitor speed of the fans, whit a inline temp sensor i posted you have the option to look at the temp on the water and monitor that.
and you have the option to Customizable the Channels ( says so on the specs )
07-10-2013 11:50 AM
MadaoROG wrote:
The main reason I chose the Lamptron FC8 is because it has 8 fan controllers for the 8 fans I'll have on the rad.
Also, do you think one 480 in push pull is not enough for the gpu/cpu/mofset?
The only reason i went with the 480 is because I figured a 480mm long and 60mm thick radiator would be sufficient.
If it's not then i might get 2 360s or something.