08-15-201104:22 PM - last edited on 03-05-202408:06 PM by ROGBot
I run my cpu at 1.06v on manual but when I try to enable offset so that the cpu will run at less volts when idle I cannot adjust the volts as they reset at 1,2v. Is there anyway to run manual at 1.06v and also enable the cpu to idle at .08 ? Thanks.
If 1.20V is base you will need to set a negative offset value and reduce the voltage down to where it needs to be. No way to program the deltas in Offset mode exactly.
.jpg "Raja"){kind=avatar}
