Results 1 to 3 of 3

Threaded View

  1. #1
    New ROGer Array
    Join Date
    Jul 2013
    Reputation
    10
    Posts
    2

    Applied memory voltage higher than set voltage on Maximus VI Hero

    Hello all.
    I have a system I'm in the process of testing having just built with a Maximus VI Hero board, i7 4770K, and G.Skill Trident X DDR3-2400.
    The issue I'm having is I'm a bit concerned that the voltage being applied to the memory when using the XMP profile is a bit higher than the already high 1.65V in the profile: if the memory on the board is set to run at 1.65V, I'm seeing 1.665-1.670 on the memory. I can drop the voltage down and see the applied voltage drop by roughly the same amount, so a setting of 1.64 yields roughly 1.655-1.660. My understanding was that going above 1.65V over the long term (I need the system to last 3-4 years) is not a good thing.
    I guess the first question is, is that true? What's a good, long term safe voltage?
    And second, how concerned should I be that the voltage being applied to my memory is higher than the voltage I've set? Should I be looking at something in particular to change to try to drop that down so they match, is there an issue with the board? Any guidance would be greatly appreciated.
    Thanks.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •