Page 18 of 31 FirstFirst ... 8 16 17 18 19 20 28 ... LastLast
Results 171 to 180 of 304
  1. #171
    ROG Guru: Brown Belt Array nikosa43's Avatar
    Join Date
    Jun 2012
    Reputation
    73
    Posts
    1,014

    About the new BIOS, 19xx I think I am going to pass . Last time I used the 18xx it was a disaster. So I stick to 17xx. 19xx, I think writes the new Intel RST driver. As for Unoborg's boot time in 8 seconds, that's because his drive is a hybrid one, with a small 8 Gb SSD on it. So, critical OS files are stored there, improving boot time but the applications run from the mechanical part. If he transfer everything on a real SSD he will improve his RB score and he will accelerate his applications by a good margin.

  2. #172
    ROG Guru: Brown Belt Array meankeys PC Specs
    meankeys PC Specs
    MotherboardRampage VI Apex / Maximus IX APEX / Rampage V EX V10
    Processor7920X / 5960X / 6950X / 7700K
    Memory (part number)G.Skill Trident Z - 16GB
    Graphics Card #1Zotac 1080 Ti
    Graphics Card #2Zotac 1080 Ti
    Graphics Card #3ASUS STRIX GTX 1080 OC
    Monitor3 X ASUS V248Q
    Storage #1Samsung 950 Pro
    CPU CoolerCool Express SS
    Power SupplyThermaltake Tough Power Grand 1200W
    Keyboard Cyberus
    Headset Tittan
    OS Win 7 64bit
    Network RouterASUS
    meankeys's Avatar
    Join Date
    Apr 2013
    Reputation
    104
    Posts
    1,553

    Nick - I flashed it last night and don't see any noticeable changes. I used the flash drive method no problem installing.

  3. #173
    ROG Guru: Brown Belt Array meankeys PC Specs
    meankeys PC Specs
    MotherboardRampage VI Apex / Maximus IX APEX / Rampage V EX V10
    Processor7920X / 5960X / 6950X / 7700K
    Memory (part number)G.Skill Trident Z - 16GB
    Graphics Card #1Zotac 1080 Ti
    Graphics Card #2Zotac 1080 Ti
    Graphics Card #3ASUS STRIX GTX 1080 OC
    Monitor3 X ASUS V248Q
    Storage #1Samsung 950 Pro
    CPU CoolerCool Express SS
    Power SupplyThermaltake Tough Power Grand 1200W
    Keyboard Cyberus
    Headset Tittan
    OS Win 7 64bit
    Network RouterASUS
    meankeys's Avatar
    Join Date
    Apr 2013
    Reputation
    104
    Posts
    1,553

    Hay Who is using Core Tenp?

    What voltage is showing in the VID

  4. #174
    Rockford
    Guest
    vcore mean>>>> i think

  5. #175
    ROG Guru: Brown Belt Array meankeys PC Specs
    meankeys PC Specs
    MotherboardRampage VI Apex / Maximus IX APEX / Rampage V EX V10
    Processor7920X / 5960X / 6950X / 7700K
    Memory (part number)G.Skill Trident Z - 16GB
    Graphics Card #1Zotac 1080 Ti
    Graphics Card #2Zotac 1080 Ti
    Graphics Card #3ASUS STRIX GTX 1080 OC
    Monitor3 X ASUS V248Q
    Storage #1Samsung 950 Pro
    CPU CoolerCool Express SS
    Power SupplyThermaltake Tough Power Grand 1200W
    Keyboard Cyberus
    Headset Tittan
    OS Win 7 64bit
    Network RouterASUS
    meankeys's Avatar
    Join Date
    Apr 2013
    Reputation
    104
    Posts
    1,553

    Thanks WPaw

    I thought so too but CPUZ reading 1.625 and core temp = 1.215?

  6. #176
    Rockford
    Guest
    Sensor stuff?

    i also got slightly different reading when i checked for you (probe II), but not with that much..

    I am pretty sure its the vcore

  7. #177
    ROG Guru: Brown Belt Array meankeys PC Specs
    meankeys PC Specs
    MotherboardRampage VI Apex / Maximus IX APEX / Rampage V EX V10
    Processor7920X / 5960X / 6950X / 7700K
    Memory (part number)G.Skill Trident Z - 16GB
    Graphics Card #1Zotac 1080 Ti
    Graphics Card #2Zotac 1080 Ti
    Graphics Card #3ASUS STRIX GTX 1080 OC
    Monitor3 X ASUS V248Q
    Storage #1Samsung 950 Pro
    CPU CoolerCool Express SS
    Power SupplyThermaltake Tough Power Grand 1200W
    Keyboard Cyberus
    Headset Tittan
    OS Win 7 64bit
    Network RouterASUS
    meankeys's Avatar
    Join Date
    Apr 2013
    Reputation
    104
    Posts
    1,553

    Thanks Bud

    May be Ill install probe II and check some voltages.
    My Volt Meter reads what CPUZ reads for vcore

    Thanks

  8. #178
    ROG Guru: Brown Belt Array meankeys PC Specs
    meankeys PC Specs
    MotherboardRampage VI Apex / Maximus IX APEX / Rampage V EX V10
    Processor7920X / 5960X / 6950X / 7700K
    Memory (part number)G.Skill Trident Z - 16GB
    Graphics Card #1Zotac 1080 Ti
    Graphics Card #2Zotac 1080 Ti
    Graphics Card #3ASUS STRIX GTX 1080 OC
    Monitor3 X ASUS V248Q
    Storage #1Samsung 950 Pro
    CPU CoolerCool Express SS
    Power SupplyThermaltake Tough Power Grand 1200W
    Keyboard Cyberus
    Headset Tittan
    OS Win 7 64bit
    Network RouterASUS
    meankeys's Avatar
    Join Date
    Apr 2013
    Reputation
    104
    Posts
    1,553

    Quote Originally Posted by flexnl View Post
    might be cause you run it on CL10
    my run was on CL9 try it
    I was playing with that last night but @ cl9 it will only run at 2400. what voltage do you use at that setting? I cant get past 2800 MHz and I see you did as well.

  9. #179
    ROG Guru: Orange Belt Array flexnl PC Specs
    flexnl PC Specs
    Motherboardrampage v extreme
    Processor5820k
    Memory (part number)dom plats 3200mhz
    Graphics Card #1GTX980 TI
    Storage #1samsung 960 EVO
    CPU CoolerNZXT x52
    Casethermaltake vieuw
    Mouse asus sica
    OS win 10
    flexnl's Avatar
    Join Date
    Oct 2012
    Reputation
    18
    Posts
    431

    maxclock up until now is 1425mhz (2850)
    and CL9 is stable up until 2666
    so if i run 2666 @ cl9 i can still bump up the bclck with 2.1 maybe more
    plus i try to get alll other timings down also ofcoursse (secondary and tertiairy)
    Last edited by flexnl; 09-23-2013 at 05:12 PM.

  10. #180
    ROG Guru: Orange Belt Array flexnl PC Specs
    flexnl PC Specs
    Motherboardrampage v extreme
    Processor5820k
    Memory (part number)dom plats 3200mhz
    Graphics Card #1GTX980 TI
    Storage #1samsung 960 EVO
    CPU CoolerNZXT x52
    Casethermaltake vieuw
    Mouse asus sica
    OS win 10
    flexnl's Avatar
    Join Date
    Oct 2012
    Reputation
    18
    Posts
    431

    oh and volltage is @ 1.850-1.875 when benching

Page 18 of 31 FirstFirst ... 8 16 17 18 19 20 28 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •