Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    May 2017

    Air cooler for this motherboard?

    Can anyone recommend a good air cooler thats easy to install for this board? Would I have to remove the backplate? I'm still a newish to PCs and would like to overclock my cpu. I don't think the stock cooler will cut it. My case is the NZXT H440 and my ram is G skill trident Z RGB, so hopefully I won't have clearance issues. Oops I thought this was in the crosshair hero vi forum.
    Last edited by MichaelGivens; 09-04-2017 at 07:03 PM.

  2. #2
    ROG Guru: Brown Belt Array Vlada011 PC Specs
    Vlada011 PC Specs
    MotherboardRampage V E10 (BIOS 1903)
    ProcessorIntel®i7-5820K (4.5GHz 1.325V)
    Memory (part number)CMD16GX4M4A2666C15
    Graphics Card #1ASUS GTX1080Ti Poseidon
    Sound CardSound Blaster ZxR
    MonitorSamsung P2450H
    Storage #1Samsung 970 EVO PLUS 1TB
    Storage #2Samsung 850 EVO 1TB/WD Black 2TB
    CPU CoolerEK RGB Monoblock RVE10
    CaseLian Li PC-O11 WXC
    Power SupplyEVGA 1200 P2
    Keyboard Deck 87 Francium PRO - MX Brown DS PBT
    Mouse Logitech G900
    Mouse Pad Steeseries QCK
    Headset/Speakers CREATIVE T5900 5.1
    OS Windows 10 Pro x64 v1903
    Accessory #1 iPhone SE Space Grey
    Accessory #2 EK XRES D5 Revo 100 Glass PWM + CoolstreamPE 360
    Accessory #3 Noctua NF-A12x25 PWM x3 (radiator)
    Vlada011's Avatar
    Join Date
    Oct 2013

    Crosshair 6 Hero? I suppose you want to cooldown VRM.
    I think VRM on Crosshair VI Hero is capable to resist Ryzen processors.
    If you are newbie you need only to read about overclocking CPU, don't need to worry about VRM heat only to pay attention on voltage.
    Did you check temps in AIDA64 under sensors? PCH, VRM, Motherboard temps??? Did you saw high temps in some software or heat sink is hot on touch.
    Avoid to touch motherboard while work if you are newbie, special VRM section, chokes and caps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts