- last edited on by
ROGBot
Hi to all,
I will present my project here modding "Shielding war".
Here you can follow the progress of my mod!
My Facebook page here: https://www.facebook.com/MathModding
Sponsors: ANTEC France, Sassanou Watermod, Crucial France, Seasonic, Be Quiet, INTEL (for now).
Go here as promised information about my project mod yard!
The theme:
"Shielding War".
The case ANTEC will be fully covered with a shield or armor armor made with PVC 5mm thick. The colors used are dark green / matte black.
Basically I do not care that the base frame of LanBoy Air and I'll recreate all the doors, front, above, below, in short all the way to the box a completely unique and very sober face. I'm much emphasis on the finish.
Config:
Boital: LanBoy Air (Modding finish)
Power Supply: Seasonic X650 80 + Gold Modular
Motherboard: Asus sabertooth Z77 Thermal Armor
CPU: Core i7 3770K
DDR3: 16GB Crucial Ballistix ELITE cas9 PC3-14900
Graphics card: SLI ASUS GTX670 TOP DCUII or (a SLI GTX7xx)
Fan watercooling: Be quiet Silent Wings 2 120
HDD: 1 OCZ Vertex 2+1 Velociraptor 300GB (10000tr/min)
The watercooling is Acrilyc rigid tubing EK-HD. With one EK waterblock for CPU, 1 rad EK 240 XT, 1 Laing pump dcc 1T + with a reservoir Swiftech micro res rev2.
Well, I'm still waiting for answers to some fairly large components, but most of the mod is here!
I will present my project here modding "Shielding war".
Here you can follow the progress of my mod!
My Facebook page here: https://www.facebook.com/MathModding
Sponsors: ANTEC France, Sassanou Watermod, Crucial France, Seasonic, Be Quiet, INTEL (for now).
Go here as promised information about my project mod yard!
The theme:
"Shielding War".
The case ANTEC will be fully covered with a shield or armor armor made with PVC 5mm thick. The colors used are dark green / matte black.
Basically I do not care that the base frame of LanBoy Air and I'll recreate all the doors, front, above, below, in short all the way to the box a completely unique and very sober face. I'm much emphasis on the finish.
Config:
Boital: LanBoy Air (Modding finish)
Power Supply: Seasonic X650 80 + Gold Modular
Motherboard: Asus sabertooth Z77 Thermal Armor
CPU: Core i7 3770K
DDR3: 16GB Crucial Ballistix ELITE cas9 PC3-14900
Graphics card: SLI ASUS GTX670 TOP DCUII or (a SLI GTX7xx)
Fan watercooling: Be quiet Silent Wings 2 120
HDD: 1 OCZ Vertex 2+1 Velociraptor 300GB (10000tr/min)
The watercooling is Acrilyc rigid tubing EK-HD. With one EK waterblock for CPU, 1 rad EK 240 XT, 1 Laing pump dcc 1T + with a reservoir Swiftech micro res rev2.
Well, I'm still waiting for answers to some fairly large components, but most of the mod is here!
This radiator support made ALU 1mm.
This will give you an overview of the installation:)
This will give you an overview of the installation:)
After a few hours of sanding: bor:
This shielding the finished door! This will give you a little idea of the final result when applied to the entire case.
Are only a matte paint if I can not get the result I expect the final sanding with very fine (to see).
I will attack the holes for fixing!
Après quelques heures de ponçage
Voilà le blindage de la porte fini! Cela peu vous donnez un idée du résultat final une fois appliqué sur toute le boitier.
Ne reste plus que la peinture mat si je n'arrive pas à avoir le résultat que j'attends avec le ponçage final en très très fin (a voir).
Je vais attaquer les perçages pour la fixation!
The turn of the compartment door watercooling!
Au tour de la porte du compartiment watercooling!
This shielding the finished door! This will give you a little idea of the final result when applied to the entire case.
Are only a matte paint if I can not get the result I expect the final sanding with very fine (to see).
I will attack the holes for fixing!
Après quelques heures de ponçage
Voilà le blindage de la porte fini! Cela peu vous donnez un idée du résultat final une fois appliqué sur toute le boitier.
Ne reste plus que la peinture mat si je n'arrive pas à avoir le résultat que j'attends avec le ponçage final en très très fin (a voir).
Je vais attaquer les perçages pour la fixation!
The turn of the compartment door watercooling!
Au tour de la porte du compartiment watercooling!
This is the front!
With the sides you can get an idea of the face of boital knowing that remains above me to
Standard colors, I will change the yellow to white and leave the screen as it is!
This is my first big mod, so I **** somewhere, let yourself go
With the sides you can get an idea of the face of boital knowing that remains above me to
Standard colors, I will change the yellow to white and leave the screen as it is!
This is my first big mod, so I **** somewhere, let yourself go
Front set fixed.
Slowly but surely!
Face avant fixé
Doucement mais surement!
Slowly but surely!
Face avant fixé
Doucement mais surement!
My ASUS sabertooth Z77 and purchased:D
Armored card for armored modding:p
Armored card for armored modding:p
My ASUS sabertooth Z77shiping:)
Armored card for armored modding!
Armored card for armored modding!
