©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Cerius · ‎09-12-2013

Sent from Windows Mail
Hello community
I found this forum and wanted to Geforce lot, but not relevant.
I no longer looking on.
Problem with my SLI System.
here is my rig:
*
ASUS Maximus V form Thunder FX
*
Operating system: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.130531-1504)
*********** Language: German (Regional Setting: German)
System Manufacturer: System manufacturer
******* System Model: System Product Name
*************** BIOS: 1803
********** Processor: Intel (R) Core (TM) i7-3770K CPU@3.50GHz (8 CPUs), ~ 3.5GHz
************* Memory: 16384MB RAM
Available OS Memory: 16258MB RAM
*
2x GTX 680 BIOS 80.04.47.00.0D (P2002-0000) flashed individually. GOP
3x Monitor Model: ASUS VS228 for 2d surround
1x Monitor Model: ASUS VS228 Accessory for
Bios setting cms enable , goes my SLI nvidia 2d surround with accessoir as it should.
Bios setting cms desabled , is not my SLI nvidia 2d surround. had to change cables to get logo from the monitor in the middle. to set up the dual SLI
2d surround + Accessory red screen of death. I tried all possible ways + connection cables.
it will not go.
hope you can help me here.

thank you

Asus MVF/T : i7 3770k @ 4.6 GHz : Corsair Dominator Platinum CMD16GX3M4A2400C9 1x Asus GTX680-DC2T-2GD5I : 2xSamsung 840 (250GB) RAID0 : 4x3TB Seagate Barracuda : Corsair H100 : AirFlow Pro™ Dynamic Temperature and Activity Display : alphaLCD 240X128 : Corsair 600T Mid-Tower Case

HiVizMan · ‎09-12-2013

I found this

If you stay in Surround mode, SLI is activated. It tells you beneath that area "SLI Enabled" Span the displays with Surround, choose Bezel correction or not (I prefer not) and once you have your monitors in teh correct order you're done.

Center monitor is plugged into the top card in slot 1.

the other 2 monitors are plugged into the bottom card, slots 1 and 2 respectively.

"Active All Displays" does not offer SLI support.

Living, playing and working Nvidia Surround is possible. I just found a program called SplitView that does Nvidia's job for them. Allows max / min windows per monitor.

Gaming is of no issue. Nvidia Surround "Just works" less the window issue. Hopefully by Christmas of next year, I won't have to use 3rd party software, but for now it works fine.

You must have a newer monitor(s) that has DVI plugs to take advantage of this without, or little to no issues. The adapters might work, but if there are issues, then that is why.

And this is the surround set up tool for your system.

http://www.geforce.com/hardware/technology/3dvision-surround/system-requirements

To help us help you - please provide as much information about your system and the problem as possible.

Cerius · ‎09-13-2013

Hello HiVizMan thanks for the info mation, but unfortunately not all go settings
now have try everything to get to the accessoir display, it will not work.
in the nvida control system can I do to hook accessoir not purely
I only surround configuriert monitor with 3, and later joined the accessoir display. I'm going crazy. funny it is when I have the main board CMS enable anything goes. But if I, "CMS" disable in the BIOS MAXIMUS V form is not the accessoir display. win 8

I also tested in win 8.1. I get crashes or frezzer

I'm no expert, but my guess is the bios what is wrong with the
either the GOP have VBIOS error or Maximus bios form.

oh well. 'm at the end.

thanks again

Asus MVF/T : i7 3770k @ 4.6 GHz : Corsair Dominator Platinum CMD16GX3M4A2400C9 1x Asus GTX680-DC2T-2GD5I : 2xSamsung 840 (250GB) RAID0 : 4x3TB Seagate Barracuda : Corsair H100 : AirFlow Pro™ Dynamic Temperature and Activity Display : alphaLCD 240X128 : Corsair 600T Mid-Tower Case

sectionate · ‎09-13-2013

HiVizMan wrote:
I found this

And this is the surround set up tool for your system.

http://www.geforce.com/hardware/technology/3dvision-surround/system-requirements

single (most) 600 series can handle 3+ monitors on it. Where did you copy and paste that from?

Crosshair IV 1090T 4093.7 - Crosshair V FX - 8350 Batch # 1243PGT 4.422MHz - 4816.08 MHz 1.5v - GSKILL F3-14900CL9D-8GBSR(x2)1087.6 11-12-10 1.5volts - ViewSonic VX2439wm - Acer GD235HZ - SyncMaster P2350 - PowerColor Red Devil RX 480 8GBD5-3DH/OC - Current Mode: 5760 x 1080 - (retired) ASUS GTX660DC2O2GD5 - Nvidia 3D Vision Wired - HAF 932 - Corsair HX850 - Corsair H100i - latest quakelive.com - Day thirteen 60fps - as always I'm powered by Futurelooks.com

Nvidia surround 2D GTX680-DC2T-2GD5 dual SLI trouble