Results 1 to 6 of 6
  1. #1
    New ROGer Array
    Join Date
    Sep 2013
    Reputation
    10
    Posts
    1

    Question to those who have replaced/changed the screen (G750JW or any).

    I currently have the G750JW, and having the lines issue I'm considering replacing the screen with a better quality one from screen country. (Tried all the fixes and lines still appear at times). Anyway how hard is the screen to change, and how much of the laptop do i need to disassemble? On screen country they had a tutorial for a different model and it appears you just need to remove the screws on the screen and it comes right out. Next, should I go with matte or gloss (I mostly game and watch movies). I have a G74SX with a glossy screen, both have pros and cons but it seems the glossy pulls ahead slightly. Just would like a bit of input.

    tl;dr: How hard is replacing the screen and matte vs glossy screen.

    On an off note, I was trying to find ram and the only 1.35v I could find was crucial (16GB for $132), if anyone knows of better let me know.

  2. #2
    ROG Guru: Orange Belt Array
    Join Date
    Jul 2013
    Reputation
    41
    Posts
    325

    You're asking for someone to admit to having voided their warranty .

    I've heard that it's not any different than any LCD replacement - e.g. http://www.youtube.com/watch?v=lLDBUnTg4rw should be all you need, the chassis being similar to the G750.

  3. #3
    ROG Guru: White Belt Array
    Join Date
    Sep 2013
    Reputation
    10
    Posts
    123

    Too bad there isn't any sound here. Also, it isn't very clear concerning how the screen goes off once the screws are removed. (the video ends abruptly)
    Are there only the 4 screws hidden behind the triangular rubber things at the corners to hold the bezel?
    A picture tutorial would be nice.
    Last edited by Pierre990429; 09-26-2013 at 07:00 PM.

  4. #4
    ROG Guru: Orange Belt Array
    Join Date
    Jul 2013
    Reputation
    41
    Posts
    325

    You could just google for more G75VW (or other G75 models) videos, it's been around much longer. As for the procedure, it would be like any other laptop:
    1. Reveal screws, usually hidden by rubber legs.
    2. Unscrew said screws.
    3. Pop the plastic bezel out. This is likely the hardest part, usually you stick your fingers under the inner edge of the bezel, and pull up/bend till it pops.
    4. Unscrew the LCD (it may come off with a metal frame, or may not, depending on laptop model - unscrew the frame if applicable). Make sure you hold the LCD so it doesn't fall off and tear off its cable when removing last couple of screws.
    5. Unplug the cable connector carefully, plug it in the new LCD.
    6. Reassemble.

  5. #5
    ROG Enthusiast Array
    Join Date
    Aug 2013
    Reputation
    10
    Posts
    27

    This laptop is very sensitive to voltages. Don't do it.

  6. #6
    New ROGer Array
    Join Date
    Oct 2012
    Reputation
    13
    Posts
    2,441

    i am not agree you dismatle by youself and asus can not make sure it is fit which you buy from other store.
    also you will void warranty.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •