10-11-2013 12:19 AM - last edited on 03-06-2024 07:21 PM by ROGBot
10-11-2013 01:00 AM
10-11-2013 04:22 PM
DragonClaVV wrote:
Have you followed the guide?
Go into the Marvell controller while the raider is on legacy mode und delete the raid 0. then reboot. now the 2 drives should be recognized. but that doenst work if the raidr is the sysemdrive because you will lose any data.
10-12-2013 04:42 AM