- last edited on by
ROGBot
Hi my fellow modders,
Think you have heard of this new case(s) from Cooler Master: The HAF Stacker
This combines the HAF and the Stacker series and has a nice and new concept: modular cases
The case is designed so that can be used to create different configurations. The various housings combined with each other
This time I will use all 3 parts to build a case that is somewhat larger than normal.
I will also make use of the fact that there is a great competition going on. Presented by ..... Cooler Master.
Because they have again the confidence in me to work with this brand new case, I will try to do a Cooler Master casemod competition theme. This will include logos, shapes, little advertising and some updates on this event.
So if you like to win beautiful http://mod.coolermaster.com/prizes.html"]prizes[/URL]
Come on and participate!!!
How it all began:
Sometimes I have a lot of respect for the postal guys. The 3 packages
Larger then my son
Unboxing.
These are the different modular cases:
Once stacked ... BIG 🙂
First some detail shots.
The 925:
Inside:
More parts soon!!!
Update!!!
First some pictures from the two parts I have received also...
The 915F where the PSU is mounted at the front
The 915R is for the PSU at the back
And some pictures outside
Time to stack all
915R placed beneath
915F on top
Pretty BIG!!!
Time for some modding I think.
This time a little different kind of modding. I rotated the case, so it becoming a kind of ghetto blaster.
I have slightly modified the connection strips so it become all the same on both sides. and removed the unnecessary stuff... maybe placed back later.
Looks nice all ready
Placed the original modo tray back under a small angle
Did some cutouts on both sides
Removed some steel from the top
And placed the tray again
There will be other hardware but this is for measurments.
Placed some acrylic underneath the motherboard tray for mounting some great products....But more on this later.
Thanks for your attention 😉
Time for some modding I think.
This time a little different kind of modding. I rotated the case, so it becoming a kind of ghetto blaster.
I have slightly modified the connection strips so it become all the same on both sides. and removed the unnecessary stuff... maybe placed back later.
Looks nice all ready
Placed the original modo tray back under a small angle
Did some cutouts on both sides
Removed some steel from the top
And placed the tray again
There will be other hardware but this is for measurments.
Placed some acrylic underneath the motherboard tray for mounting some great products....But more on this later.
Thanks for your attention 😉
Kier
Update!!!
All the beautiful products have come in the past few weeks for this build. Therefore a major update with everything. There will be 2 updates this weekend, because it's a lot 🙂
First, there was a nice package from Cooler Master
Including pretty amazing fans: The newJetFlow's 120
Because I'm still not sure which color I'm going to use, I have requested three available colors
JetFlow 120 white
Some specs from these great fans:
- LED Color: Dark (No LED) / Red / Blue / White
- Dimensions: 120 x 120 x 25 mm / 4.7 x 4.7 x 1 inch
- Fan Speed: 800-2000 RPM (PWM) ± 10%; w/ silent adapter: 1600/1200 RPM (fixed)
- Air Flow: 95 CFM ± 10%
- Air Pressure: 2.72 mmH2O ± 10%
- Life Expectancy 160,000 hrs
- Noise Level: 19 dBA (1200 RPM with included silent mode adapter)
- 28 dBA (1600 RPM with included silent mode adapter)
- 12-36 dBA (PWM)
- Bearing Type POM Bearing - CM 4th Gen. bearing (*POM: Polyoxymethelene)
- Connector: 4-Pin (PWM)
- Voltage: 12 VDC
- Current: 0.4A
- Power Consumption: 4.8W
Shock-absorbing feet
Also in red
And without LED, all black
Comes with 2 adapters: 1 for 1600 RPM (28 dBA) and 1 for 1200 RPM (19 dBA)
Power on
More about the Cooler Master box later 😉
Also EKWB is helping me with this build, so also a nice EKWB box:
With lots of lovely products
First, I have requested two beautiful radiators : De EK-CoolStream RAD XT (480)
Looks very good with the new Cooler Master JetFlow's
This set will be placed on both sides of the HAF Stacker, like this:
For this my good friend Pascal and I made 2 beautiful covers:
With nice looking bevel edges
Thanks Pascal van Veen, another piece of art man.
For this cover I first pasted a layer of white vinyl and then black.
EKWB radiator behind it with the JetFlow's
Also, I requested two beautiful reservoirs. The EK-RES X3 400
With mounting material
And two extra multiport tops to try some things.
Which will be placed like this
