That may have been the case a few generations ago but with the current ASUS ROG range there are basicaly three settings you change.
XMP as mode of Overclock This sorts out all your memory settings and you do not need to change anything else to do with the memory voltages or timings.
Digi+ You want to set your LLC to medium (here you are correct auto would set it way to high)
And then finally
Vcore to offset
+ or - and then a value normally in this form (+ 0.020) or (- 0.005)
Those are the three voltage related things you would change in bios.
Other settings are Multiplier and your mode of SATA
Leave all else on auto.
🙂
To help us help you - please provide as much information about your system and the problem as possible.