Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 59
  1. #1
    ROG Guru: Grand Master Array
    Join Date
    Oct 2012
    Reputation
    339
    Posts
    15,255

    Memory Setup Guide For Maximus VI Motherboards

    Maybe you’re putting together your first build but and you have no idea how to setup your RAM. Or perhaps you just made a major memory upgrade but you’re not experiencing any boost in performance whatsoever. Your RAM probably isn’t running at its full speed. So don’t start pulling your hair out! We’ll guide you step by step to configure them in no time!


    So, what do you need to setup your RAM?
    First, you’ll need a Maximus VI series motherboard, of course. For this guide, we’ll be using our Maximus VI Hero motherboard to illustrate the whole setup process. But the steps are universal for the other motherboards in the series as well!

    Click image for larger version. 

Name:	20131024_223426.jpg 
Views:	478 
Size:	637.8 KB 
ID:	28811


    And, last but not least, you’ll need a kit of RAM. We’ll be using our favorite TridentX 2400MHz 8GB kit from our friends at G.Skill.

    Click image for larger version. 

Name:	20131024_223856.jpg 
Views:	250 
Size:	417.5 KB 
ID:	28812


    Which slots should you use?
    The appropriate slots to use depend on how many sticks of RAM you’re going to put in your system. We have listed the possible combinations and the optimal slots that you should be using.

    Click image for larger version. 

Name:	1382996385112.jpg 
Views:	557 
Size:	714.6 KB 
ID:	28896


    How many methods are there to setup your RAM?
    The first method consists in using Intel's X.M.P. profile which automatically inputs the frequency, timings and voltage. On the other hand, the second methods involves you manually navigating to different parts of the BIOS and inputting them yourself.

    In some cases, you might run into compatibility issues between the CPU and the X.M.P. profiles. As a result, you will experience the lack of stabilty when trying to use your system. So we'll be covering both methods in this simple guide.



    Method 1. Using X.M.P. Profile

    Step 1. Hit the Del key as soon as you see the Asus logo to enter the BIOS. The option that interests us most is the Target DRAM Speed. As you can see, it’s running at its default 1333MHz frequency. Time to take these babies to 2400MHz!


    Click image for larger version. 

Name:	131026153727.jpg 
Views:	421 
Size:	457.2 KB 
ID:	28827


    Step 2. Navigate to the Ai Overclock Tuner and change it to XMP.


    Click image for larger version. 

Name:	131026153742.jpg 
Views:	312 
Size:	460.1 KB 
ID:	28828


    Step 3. Most, if not all, high performance memory kits like our TridentX 2400MHz kit will have more than one profile. In this situation we choose the one that matches the advertised frequency.


    Click image for larger version. 

Name:	131026153814.jpg 
Views:	276 
Size:	438.3 KB 
ID:	28829


    Step 4. Press F10 and a window will appear with a summary of all the changes that the XMP profile has changed. Click Yes to save and exit.


    Click image for larger version. 

Name:	131026153849.jpg 
Views:	195 
Size:	352.5 KB 
ID:	28830



    Method 2. Manual Setup

    Step 1. Start by setting Ai Overclock Tuner to the Manual.


    Click image for larger version. 

Name:	131026154004.jpg 
Views:	155 
Size:	460.1 KB 
ID:	28832


    Step 2. Scroll down to find the DRAM Frequency option. Choose the advertised frequency that your memory kit is specified to run at.


    Click image for larger version. 

Name:	131026154030.jpg 
Views:	158 
Size:	436.1 KB 
ID:	28833


    Step 3. Scroll down even farther and click DRAM Timing Control. The fun is about to start.


    Click image for larger version. 

Name:	131026154044.jpg 
Views:	186 
Size:	410.9 KB 
ID:	28834


    Step 4. In order to configure your RAM properly, you need to input the the frequency the RAM was tested to run at, the correct primary timings and the voltage it needs to run properly. You can find the timings and voltage for your specific kit on the sticker that all manufacturers put on their sticks. Here you can see an example of the timings on our G.Skill TridentX 2400MHz stick.


    Click image for larger version. 

Name:	20131026_152054.jpg 
Views:	196 
Size:	365.4 KB 
ID:	28836

    Here’s a quick crash course on memory timings. The primary timings consist of 4 numbers in this order: CL (CAS Latency), tRCD (RAS to CAS Delay), tRP (RAS Precharge) and tRAS (Active to Precharge Delay).

    Now, let’s deduce the timings for our specific kit of TridentX RAM.
    CL – 10, tRCD – 12, tRP – 12, tRAS – 31

    But what if you've already finished your build and you don't want to pop off the case cover to look at the sticker? No problem. First you need to situate yourself in the Boot tab then press the right arrow to reveal the Tools tab. Now, choose the Asus SPD Information option.

    Click image for larger version. 

Name:	131101204057.jpg 
Views:	220 
Size:	161.6 KB 
ID:	29158

    As you can see, all the X.M.P. profiles that are available for your RAM will be listed here. You can see the frequency of each profile, the voltage to run at this frequency and the primary timings that we will be changing further on.


    Step 5. What we will do no is type each timing into the corresponding section. Hit ESC when you’re done to return to the Extreme Tweaker section.


    Click image for larger version. 

Name:	131026154111.jpg 
Views:	178 
Size:	455.4 KB 
ID:	28837


    Step 6. Navigate down to the DRAM Voltage option and input the voltage that was on the sticker.


    Click image for larger version. 

Name:	131026154141.jpg 
Views:	121 
Size:	455.5 KB 
ID:	28838


    Step 7. Press F10 and a window will appear with a summary of all the changes that we’ve made. Make sure to recheck every option that you’ve changed and make sure it matches your RAM’s specifications. Click Yes to save and exit.


    Click image for larger version. 

Name:	131026154157.jpg 
Views:	133 
Size:	348.5 KB 
ID:	28839
    Last edited by Chino; 11-02-2013 at 04:33 AM.

  2. #2
    New ROGer Array
    Join Date
    Nov 2013
    Reputation
    10
    Posts
    1

    Appreciate the info! Its my first build and didn't realize I had to also set the speed and voltage besides the fequency.So this helped a lot!

  3. #3
    ROG Member Array
    Join Date
    Jun 2013
    Reputation
    10
    Posts
    7

    Motherboard manual for vi gene tells me to install my 2 sticks in the black slots, where you show them in the red slots. What are the preferred slots for 2 stick config. Would appreciate your opinion.

  4. #4
    ROG Member Array
    Join Date
    Jun 2013
    Reputation
    10
    Posts
    7

    Bump for answer.

  5. #5
    ROG Guru: Grand Master Array HiVizMan's Avatar
    Join Date
    Dec 2011
    Reputation
    354
    Posts
    25,742

    You can use both, the black slots first for the Gene board.
    To help us help you - please provide as much information about your system and the problem as possible.

  6. #6
    untouched Array Praz's Avatar
    Join Date
    Apr 2011
    Reputation
    137
    Posts
    4,038

    Quote Originally Posted by acairman View Post
    Motherboard manual for vi gene tells me to install my 2 sticks in the black slots, where you show them in the red slots. What are the preferred slots for 2 stick config. Would appreciate your opinion.
    For Z87 boards it normally doesn't matter which pair of slots are used. If pushing the memory to the extreme, timings and/or frequency, the first and third slots from the CPU are the preferred ones to use because of trace layout.

  7. #7
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    8

    Hi,

    can i get values for bios how to proper setup this RAM:
    http://www.kingston.com/datasheets/KHX21C11T2K2_16X.pdf
    because now working on defualt 1333

    thank you.

  8. #8
    ROG Guru: Grand Master Array HiVizMan's Avatar
    Join Date
    Dec 2011
    Reputation
    354
    Posts
    25,742

    Set XMP profile as the mode of overclock.
    To help us help you - please provide as much information about your system and the problem as possible.

  9. #9
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    8

    and that`s it? :S

  10. #10

Page 1 of 6 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •