- last edited on by
ROGBot
START TRANSMISSION........
Enable Blue Spark 4.1.
Enable Arc-9 reactor.
Enable Nuclear Vortex Turbine.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
START TRANSMISSION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 27.11.13_1451GMT
Upload Art Concept for reference......
Art Notes.... New Casing should be based on this colour scheme with extra work taken on making the correct definition between armour plates.
End Graphic UI.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 27.11.13_1451GMT
Upload Art Concept for reference......
Art Notes.... New Casing should be based on this colour scheme with extra work taken on making the correct definition between armour plates.
End Graphic UI.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
START TRANSMISSION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 27.11.13_1838GMT
Upload Factory Standard Unit.
End Graphic UI.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 27.11.13_1838GMT
Upload Factory Standard Unit.
End Graphic UI.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
START TRANSMISSION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 08.12.13_1300GMT
We have started work removing parts from the new structure, during this process we have found some fundamental issues with the donor chassis that will require more work prior to the start of the application of the new internal paint.
You will notice that in the bottom front behind the main 250mm Nuclear Vortex Turbine fan there is a metallic structure that then backs onto another metallic structure, this will cause massive unbalance in the airflow and result in a poor cooling experience, as such this structure must be removed before painting.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 08.12.13_1300GMT
We have started work removing parts from the new structure, during this process we have found some fundamental issues with the donor chassis that will require more work prior to the start of the application of the new internal paint.
You will notice that in the bottom front behind the main 250mm Nuclear Vortex Turbine fan there is a metallic structure that then backs onto another metallic structure, this will cause massive unbalance in the airflow and result in a poor cooling experience, as such this structure must be removed before painting.
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
START TRANSMISSION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 15.12.13_1049GMT
Removal of metallic structure behind Nuclear Vortex Turbine fan housing plate.
Before removal...
Marking up for rivet's designated for removal...
After removal...
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
Enable Blue Spark 4.1.
Enable Graphic UI.
Works Log 15.12.13_1049GMT
Removal of metallic structure behind Nuclear Vortex Turbine fan housing plate.
Before removal...
Marking up for rivet's designated for removal...
After removal...
END TRANSMISSION AWAIT FURTHER INSTRUCTION........
