WARNING ! These settings are on a system running CPU, GPU, Memory WATER COOLING Via Thermaltake Kandalf LCS Case ! I dont know if STOCK fans and heatsinks will be safe !!!
First my Components:
CHV -MB with Raja's 0053 Beta Bios
Win 7 64 bit Pro
1100T B.E.
Corsair Vengeance CMZ8GX3M2A1866C9 (1333 S.P.D.) (1866 rated) (1872 Current speed) 9-10-9-27 (Corsair Dominator CMP8GX3M2A1600C8 used to get o.s. to install) Had to install XP64 first.
CPU&CPU/NB MANUAL MODE
CPU-V -1.493750 ( will give overvolt warning in O.S. with ASUS software installed)
CPU/NB 1.481
CPU VDDA 2.775
Dram Voltage 1.65 (1.5 SPD worked but a little unstable) (1.65 I suggest good mem cooler)
VDDR 1.40450
NB Volt 1.515
NB HT 1.4
NB 1.8 1.908
VDD PCIE 1.5105
SBv 1.113 AUTO
DRAM REFRESH 7.8ms
Dram Command Rate 2T
ALL other settings AUTO
This Is giving me 3783Ghz, 1872 mem speed stable. @ 16 Gig
O.S. install was completed with the DOMINATOR memory at 8Gig. (now on EBAY hopefully can help someone else out who cant get the Vengeance to install O.S.)
I also had to install XP64Pro first once installed on an unmounted previously raided velociraptor repartitioned with basic format. Under 64 I zapped the SSD drive unlocking it and reformatted NFTS file sys.
I inserserted my O.E.M. Win7 64 Pro with WIN XP64 running and both the velociraptor set to IDE on Channel 1 and the SSD on ch5 with cdrom CH6..
as soon as it spun up IN WIN64 ??? WTF ??? I dont get it either, the auto installer started and asked if I wanted to install Win7 to OCZ xxx1234 SSD drive? I clicked yes and BOOM IT INSTALLED!
After resarting under SSD as boot drive with velociraptor diconnected it booted into 7 fine so I was able to reformat the Vel rap and re-mount it to the raid array as Drive d:
Get all that ? I'm still a little confused too. but it worked.
1100 BE Liquid Cooled, CHV, 16Gig Corsair Vengeance 1866 @ 2032, two ASUS ATI 3870's liquid cooled O.C.ed to 890Mhz, 3 Velociraptor 500G in raid 0, ocz SSD boot drive, 1200W Thermaltake P.S.