Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
  1. #1
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    15

    Question OC with fx 8350 and asus Formula V Z

    hello guys and first of all, sorry for my english, i am from argentina. And my partners/friends can´t clear my doubts
    i want to oc my fx 8350 to 4,5 and i have it but my problem is temperature and voltajes ejejejeje
    with prime95 70ºC fullLoad stable
    idle: 40
    my case is: thermaltake level 10 gt
    PSU: real power pro 750 w ( i have conected to my motherboard 8 pins only from PSU to motherboard )
    mem´s: 1600mhz gskill ddr3 8GB.
    my multi in bios is 22.5, vcore 1.41
    CPU LOAD LINE CALIBRATION : HIGH
    cool and quit, c1, c6 off
    CPU cooler: Coolermaster V8
    what is my problem guys? can helpme please!?

  2. #2
    ROG Guru: Grand Master Array HiVizMan's Avatar
    Join Date
    Dec 2011
    Reputation
    354
    Posts
    25,742

    Please fit both the 8 pin and the 4 pin if you want to OC that CPU.
    To help us help you - please provide as much information about your system and the problem as possible.

  3. #3
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    15

    Thanks HiVizMan i will do it i didn´t know thanks

  4. #4
    ROG Guru: Grand Master Array HiVizMan's Avatar
    Join Date
    Dec 2011
    Reputation
    354
    Posts
    25,742

    All good mate you do not want to hurt your CPU and the board.
    To help us help you - please provide as much information about your system and the problem as possible.

  5. #5
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    15

    Quote Originally Posted by HiVizMan View Post
    All good mate you do not want to hurt your CPU and the board.
    thnaks againt, but i have a question, the 4 pin conector
    Have anything to do with temperature?

  6. #6
    ROG Guru: Blue Belt Array ganji PC Specs
    ganji PC Specs
    MotherboardASUS Z87 Sabertooth
    Processori7 4770k
    Memory (part number)GSkill TridentX 2400MHz CL10 PC3-19200
    Graphics Card #1EVGA 980ti ACX 2.0 SC+
    Graphics Card #2EVGA 980ti ACX 2.0 SC+
    MonitorAsus VG28QE x3
    Storage #1Crucial BX100 256Gb
    Storage #2Samsung 840 Evo 250Gb
    CPU CoolerEK Predator 240
    CaseCorsair AIR 540
    Power SupplyEVGA Supernova P2 1000w
    Keyboard Coolermaster quickfire pro
    Mouse Corsair M65 RGB
    Headset Roccat Kave XTD
    Headset/Speakers Corsair SP2500
    OS Win 10 Pro
    ganji's Avatar
    Join Date
    Apr 2012
    Reputation
    71
    Posts
    901

    Quote Originally Posted by harvydent View Post
    thnaks againt, but i have a question, the 4 pin conector
    Have anything to do with temperature?
    The extra 4 pin is for extra power to the cpu, without that connected the cpu will draw too much from the 8pin alone and can damage your motherboard. The 8350 is a hungry chip when oc'd

    Take a look here http://rog.asus.com/forum/showthread...oth-990FX-R2.0

    This is what could happen if you don't have both connectors plugged in http://rog.asus.com/forum/showthread...untry=&status=

  7. #7
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    15

    Quote Originally Posted by ganji View Post
    The extra 4 pin is for extra power to the cpu, without that connected the cpu will draw too much from the 8pin alone and can damage your motherboard. The 8350 is a hungry chip when oc'd

    Take a look here http://rog.asus.com/forum/showthread...oth-990FX-R2.0

    This is what could happen if you don't have both connectors plugged in http://rog.asus.com/forum/showthread...untry=&status=
    o my good,!! thanks, with a vcoe 1,51 obiusly can damege your hardware but with a vcore 1,41 too?
    i have all ready installed but my temperaturo don´t help
    thankls again!

  8. #8
    ROG Guru: Grand Master Array HiVizMan's Avatar
    Join Date
    Dec 2011
    Reputation
    354
    Posts
    25,742

    If your cooling is up to the job then 1.500 is just fine.
    To help us help you - please provide as much information about your system and the problem as possible.

  9. #9
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    15

    hello guys again, i have allready installed the 4 pin conector to my motherboard and the 8 pin conector to.
    i have installed a water cooler performer thermaltake 3.0.
    1) anyone knows what is the voltage limit to AMD FX8350?
    2) anyone knows what is the limit temperature for the same processor?
    3) anyone knows how i reduce the RPM of my 2 coolers of radiator? i have 24/7 2000rpm and is very noise
    thnaks and regards

  10. #10
    AntiMatter Guru ROG Array chrsplmr's Avatar
    Join Date
    Jul 2011
    Reputation
    295
    Posts
    6,113

    HarveyDent .. Please Excuse my Manners for not saying so before .. Welcome to ROG.

    1. 1.5 puts you in the Red on the V. Just watch you temps. Make sure you only have one
    temp meter running at a time. I like HWMonitor, but in extreme OC'n it is a resource hog.

    2. Some say 70. My V defaults @ 90. I have had the board shut down from that temp.
    [OC'n .. not 24/7.. lol] If your system overheats and shuts down then the cooling system
    is simply inadequate or your overclock is to high for the rest of your system to handle.

    3.What are your temps. ? Is there reason for them to be that high ? What is the ambient
    temp. of the room ? Maybe they need to scream. 0r .. you need more fans ??? maybe.

    First thing. Download>> HWMonitor . .. .c.
    Last edited by chrsplmr; 12-28-2013 at 04:14 AM.

Page 1 of 3 1 2 3 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •