Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    suggy1005
    Guest

    Exclamation occasional post, bios crash

    crosshair v formula
    phenom II 1090t
    corsair vengence 1600 (CMZ4GX3M2A1600C8)

    seem to be having the same issue as a lot of people ive tried each dimm in every slot with memOK and its posted a couple of times with each dimm when inserted into far red slot but it takes forever for memOK to actually do anything and even when it post it crashes when i press DEL to enter bios or freezes on main bios screen then i need to restart and it wont post again which means i have to restart the cycle.

    dont want to have to RMA this board its amazing would this ram
    http://www.aria.co.uk/Products/Compo...roductId=46063

    (F3-12800CL6D-4GBXH)

    work any better? contemplating returning the mobo and getting the sabertooth instead.

    if you can help me get this ram to work it would be fully appreciated if not and you think the gSkill will be better i will RMA my ram the timings etc dont bother me between the two i just want my pc to work its been sat there refusing to work for 2 days now :/

    any help appreciated. suggy

  2. #2
    ROG Guru: Yellow Belt Array EVIL_CONSERVATIVE's Avatar
    Join Date
    Aug 2011
    Reputation
    9
    Posts
    195

    Look for some of my former posts. The Vengeance likes allot of voltage to NB It takes some time and allot of trial and error tweaking but you will find it is worth it in the end.
    As for the long post delays, every time you change mem slots or size or adjust bios you will get the slow post the first couple times.

  3. #3
    untouched Array Praz's Avatar
    Join Date
    Apr 2011
    Reputation
    137
    Posts
    4,037

    Set your 4 primary memory timings and memory voltage then follow the guide linked below. As Evil has noted for whatever reason Vengeance modules seem to place an abnormally large load on the IMC. You may need to boost VCORE, CPU/NB and/or NB voltages.

    http://www.asusrog.com/forums/showth...ry-Setup-Guide

  4. #4
    suggy1005
    Guest
    ok i would change my settings as im sat next my pc now and every time i get into bios it freezes before i can apply all the changes i need to :/ i wish this mobo wasnt such a hassle its sooo good looking. is there any way to make it more stable ive completely reset the bios all lights on the mobo are green i have the cpu fan running of off another connector on the mobo as the cpu one doesnt spin up enough to keep the chip cool what am i missing here will asus support be able to help me more if i call them?

  5. #5
    untouched Array Praz's Avatar
    Join Date
    Apr 2011
    Reputation
    137
    Posts
    4,037

    Use only one stick of memory in the red slot furthest from the CPU. Once you get that stable you can add the second stick.

  6. #6
    suggy1005
    Guest
    i cant even get one stick stable :/ maybe its just really incompatible should i rma the ram or the board??

  7. #7
    ROG Guru: Yellow Belt Array
    Join Date
    Aug 2011
    Reputation
    11
    Posts
    226

    have you tryed settings like.
    1. Ai overclock tuner - manual
    2. Memory Frequency - DDR800
    3. press F10 and yes

    Pressing DEL to enter a bios meens that board thinks you boot was normal. if you need to press F1 it means that overclock fail or it records you pressing memok to boot it.
    anyways only 1 press of that button is needed. pressing more then one time makes BIOS more unstable( at least for me).

    These works best on me and im useing 0506 BIOS with G.Skill snipers
    CPU: AMD FX-8150 MB: ASUS Crosshair V Formula DDR3: 2x4GB G.Skill Sniper DDR3-1866
    GPU: ASUS 7970 SSD: 4x Corsair F3 120GB @ Raid0 PSU: SF Golden Silent 500W OS: W7 Ultimate 64bit

  8. #8
    ROG Guru: Brown Belt Array NemesisChild PC Specs
    NemesisChild PC Specs
    MotherboardASUS Maximus X Hero (WI-FI AC)
    ProcessorIntel i7 8700K
    Memory (part number)G.Skill F4-3600C16D-16GTZR
    Graphics Card #1Nvidia GTX 1070 Ti FE
    Graphics Card #2Nvidia GTX 1070 Ti FE
    MonitorASUS ROG Swift PG278Q
    Storage #1Samsung 970 PRO 512GB NVMe M.2
    Storage #2WD Black 2TB 7200 RPM 64MB Cache
    CPU CoolerNZXT Kraken X42
    CaseCooler Master HAF 932 Advanced
    Power SupplyEVGA SuperNova 1200 P2
    Keyboard Logitech G910 Orion Spark
    Mouse Logitech G703 Wireless
    Headset Logitech G Pro
    Mouse Pad SteelSeries
    OS Windows 10 Home x64 (UEFI)
    Network RouterLinksys WRT1900AC
    NemesisChild's Avatar
    Join Date
    Sep 2011
    Reputation
    89
    Posts
    1,788

    Clear the CMOS again and...
    With one stick installed, manually enter your CL8 timings & 1600 frequency.
    Then try 1.5250v DRAM voltage & 1.25-1.275v CPU/NB voltage.

    Don't let these settings run on auto, my 1.50v 1866 G.Skill set needs 1.5250v to run stable.

    And btw, what PSU are you using?
    Intel i7 8700K@ 5.2GHz (Delidded)
    ASUS Maximus X Hero (Bios 1801)
    NZXT Kraken X42
    G.Skill TridentZ@ 4000MHz CL16 2x8GB
    SLI: 2x Nvidia GTX 1070 Ti FE@ 2025/2025MHz
    OS: Samsung 970 PRO 512GB NVMe M.2
    Storage: Samsung 960 EVO 500GB NVMe M.2
    Storage: 2x Samsung 850 EVO 500GB
    Storage: WD Black 7200 RPM 64MB Cache 2TB
    EVGA SuperNova 1200 P2
    Cooler Master HAF 932 Advanced

  9. #9
    ROG Guru: Yellow Belt Array
    Join Date
    Aug 2011
    Reputation
    11
    Posts
    226

    Sry OT: NemesisChild, are writeing to me or Suggy1005?
    Those settings that i posted wasnt going to be final. Those are stetings that you may have time to change before BIOS Crash.
    After those saved and rebooted, you may have stable BIOS to get final settings.

    If it was for me;
    I tryed 1.3v on cpu/nb but yeah havent added 0..250v to volts (mainly trying to run 1600 stable more then 3 days), but i do it next. THANKs for the tip
    My PSU is Corsair AX1200 from my old Maximus GENE build.

    Cpu temps are 43c* max on 100% prime, last time i had 1600 prime 12hour up but on next boot wasnt so lucky so stable in W7 isnt everything.
    CPU: AMD FX-8150 MB: ASUS Crosshair V Formula DDR3: 2x4GB G.Skill Sniper DDR3-1866
    GPU: ASUS 7970 SSD: 4x Corsair F3 120GB @ Raid0 PSU: SF Golden Silent 500W OS: W7 Ultimate 64bit

  10. #10
    ROG Guru: Brown Belt Array NemesisChild PC Specs
    NemesisChild PC Specs
    MotherboardASUS Maximus X Hero (WI-FI AC)
    ProcessorIntel i7 8700K
    Memory (part number)G.Skill F4-3600C16D-16GTZR
    Graphics Card #1Nvidia GTX 1070 Ti FE
    Graphics Card #2Nvidia GTX 1070 Ti FE
    MonitorASUS ROG Swift PG278Q
    Storage #1Samsung 970 PRO 512GB NVMe M.2
    Storage #2WD Black 2TB 7200 RPM 64MB Cache
    CPU CoolerNZXT Kraken X42
    CaseCooler Master HAF 932 Advanced
    Power SupplyEVGA SuperNova 1200 P2
    Keyboard Logitech G910 Orion Spark
    Mouse Logitech G703 Wireless
    Headset Logitech G Pro
    Mouse Pad SteelSeries
    OS Windows 10 Home x64 (UEFI)
    Network RouterLinksys WRT1900AC
    NemesisChild's Avatar
    Join Date
    Sep 2011
    Reputation
    89
    Posts
    1,788

    Isn't suggy1005 the original OP and the one with the problem?
    Intel i7 8700K@ 5.2GHz (Delidded)
    ASUS Maximus X Hero (Bios 1801)
    NZXT Kraken X42
    G.Skill TridentZ@ 4000MHz CL16 2x8GB
    SLI: 2x Nvidia GTX 1070 Ti FE@ 2025/2025MHz
    OS: Samsung 970 PRO 512GB NVMe M.2
    Storage: Samsung 960 EVO 500GB NVMe M.2
    Storage: 2x Samsung 850 EVO 500GB
    Storage: WD Black 7200 RPM 64MB Cache 2TB
    EVGA SuperNova 1200 P2
    Cooler Master HAF 932 Advanced

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Corsshair V - unStable BIOS/ no POST
    By Mummy in forum Other Series Motherboards
    Replies: 3
    Last Post: 09-06-2011, 08:37 PM
  2. Crosshair V: Won't Post, Can't get into BIOS, Won't boot to OS
    By t3haxle in forum Other Series Motherboards
    Replies: 3
    Last Post: 09-04-2011, 05:01 PM
  3. G73 Black Screen Crash
    By Kale in forum ROG Gaming Notebooks
    Replies: 5
    Last Post: 06-28-2011, 11:33 PM
  4. bios crash when i try to save M4N68T-M-V2
    By Félix Martel in forum Other Series Motherboards
    Replies: 1
    Last Post: 01-10-2011, 04:33 PM
  5. Replies: 0
    Last Post: 11-10-2010, 09:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •