Results 1 to 4 of 4
  1. #1
    WipeOut
    Guest

    Exclamation Very Strange Problem

    Hello

    I have unfortunately gone into a problem which I just can not find the solution to.

    The computer starts fine and there is no indication that there was anything wrong. After some time using the computer decides to turn off by itself. (No of windows shut down or something just OFF as if he has taken power from it). After 10 seconds the computer starts and continues in windows where after that the mouse does not work. There I got to take the mouse out of the usb port and put it back on until after it works. It must be said that keybroad works when the mouse is not working and both of those things run on usb ports.

    I have built my machine and it is under a month old. I have built many over the years but has never steadily on this issue.

    My specs:

    CPU: Intel Core 7960 3.20 Ghz LB8
    Motherboard: Asus Rampage III Black Edition
    RAM: Corsair 12GB DDR3 PC12800 CL9 1600MHz DOMINATOR (3X4GB)
    Video Card: Asus Geforce 580 GTX 1536 MB GDDR5
    Hard disk: SSD Corsair Force GT SERIES 3 2.5 "60GB SSD MLC (SATA3)
    WD swiftly 120 GB (SATA2) and 3 other slave disks for data. (SATA2)
    Soundcard: Realtek Onboead 5.1 + Sound Blaster FX + Thunderbould
    Power Supply: Cooler Master W850
    Mouse: Mionix Naos 5000
    Keyboard: Logitek G110
    Windows: Windows 7 Ultimate 64 Bit

    For that I could get my ram up and running properly, I've set it to 1600 MHZ with 1.65 V. When I started the computer chose to say that my ram was running about 1000 MHZ with a very low voltage. Maskrinen would not even put them at the right speed. The machine has no way been overclocked. I have updated BIOS and all my drivers in windows. I have reinstalled windows nearly 100 times and this has in no way helped.

    I've also just put on the heat and everything is inside 35 of the idle.

    I really hope one of you can help.

    I apologize for my bad English but I've used google translate to help

  2. #2
    WipeOut
    Guest
    I have to tell you all that i have never got a MB like this, I was just told that it was one of the best.

    Is there some settings I should be aware of when I do not have much experience with overclocking and different things you can tamper with. I ask because I have everything on default settings and it might cause some problems?

  3. #3
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    318
    Posts
    7,727

    Is there anything in the Event Log? Follow this to look at it:
    http://windows.microsoft.com/en-US/w...n-Event-Viewer
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  4. #4
    ROG Member Array
    Join Date
    Jul 2010
    Reputation
    10
    Posts
    19

    sounds a bit like Ai Nap my mouse won't work after resume

    try uninstalling the AI Suite

Similar Threads

  1. G74 strange issues?
    By mrfox123 in forum ROG Gaming Notebooks
    Replies: 22
    Last Post: 09-21-2011, 08:29 PM
  2. strange error
    By summer in forum Other Series Motherboards
    Replies: 3
    Last Post: 08-21-2011, 03:57 PM
  3. Strange issue please help
    By VirtualZ3r0 in forum Other Series Motherboards
    Replies: 3
    Last Post: 08-12-2011, 10:06 PM
  4. Strange new unknown device
    By jdpg2 in forum Other Series Motherboards
    Replies: 1
    Last Post: 06-05-2011, 03:45 PM
  5. Strange new build issue
    By Divinedark in forum Other Series Motherboards
    Replies: 13
    Last Post: 12-29-2010, 08:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •