Realbench v2 [Discussion Thread/Download Links]

[Menthol]

Nodens you are so right, I would like to see slamms tweak his OS and run again, an IV-E at 5.0 or higher is hard to beat

[Nodens]

Yeah slamms could break 125K easily with that chip.

[meankeys]

Hi Nodens

On my RB run it reads triple channel memory not quad channel? Just thought I would mention that.

[Nodens]

That's what CPU-Z detects then. Which could mean RAM is not really stable and on boot the board disables a DIMM slot.

[meankeys]

That's what CPU-Z detects then. Which could mean RAM is not really stable and on boot the board disables a DIMM slot.

Hmm... Thanks I will check that.

[JackNaylorPE]

I managed to boost my score up to 86,098. That puts me seventh on the list with Intel processor, 2 GPUs and Maximus boards. I think that's pretty good considering I'm running 2 7950 GPUs and all but one person ahead of my are running 780s or better.

I am running 4.7 GHz at 1.45 volts. I'm actually stable at 1.43 volts for most stress tests, but crashed on the Real Bench 2.1, so had to bump it up a little to get the score. That is as far as I am going to push it. I'm going back down to 4.6 GHz at 1.35 volts for my every day use.

Are you using adaptive ? If so, what kind of Vcore boost do you wind up at under OpenCL test ? I always see 0.1 but been talking with a fella on OCN who reports miniscule voltage boosts and I can't understand how that might be possible.



QUESTION: On another topic

Looked at the thread and didn't see anything since the Ver 2.1 release date however......

I have two 256 GB SSDs (C for OS and D for Games)
I have two Seagate 2TB SSHDs (one is used for all my SOHO files over 6 partitions (2 for family use / 4 for office use with share access permitted by partition)

-When I try and run off the SSHDs version 2.0b10R6 runs just fine....
-When I try and run (as administrator) off the SSHDs version 2.1 says "Real Bench does not have write access in this directory. Please move the application elsewhere on your drives.

If it was an OS issue, then why does the earlier version work ?

When I move it to the C:\ Drive (SSD), same result

When I put it in Program Files directory, I get a Real Bench can not be placed here message.

No matter where I put 2.1 it doesn't run whereas wherever I put the older version it runs just fine. And yes, I turned off the firewall / AV / malware programs

[Barefooter]

Are you using adaptive ? If so, what kind of Vcore boost do you wind up at under OpenCL test ? I always see 0.1 but been talking with a fella on OCN who reports miniscule voltage boosts and I can't understand how that might be possible.

I am not using adaptive.

Version 2.1 works fine for me.

[Nodens]

Are you using adaptive ? If so, what kind of Vcore boost do you wind up at under OpenCL test ? I always see 0.1 but been talking with a fella on OCN who reports miniscule voltage boosts and I can't understand how that might be possible.



QUESTION: On another topic

Looked at the thread and didn't see anything since the Ver 2.1 release date however......

I have two 256 GB SSDs (C for OS and D for Games)
I have two Seagate 2TB SSHDs (one is used for all my SOHO files over 6 partitions (2 for family use / 4 for office use with share access permitted by partition)

-When I try and run off the SSHDs version 2.0b10R6 runs just fine....
-When I try and run (as administrator) off the SSHDs version 2.1 says "Real Bench does not have write access in this directory. Please move the application elsewhere on your drives.

If it was an OS issue, then why does the earlier version work ?

When I move it to the C:\ Drive (SSD), same result

When I put it in Program Files directory, I get a Real Bench can not be placed here message.

No matter where I put 2.1 it doesn't run whereas wherever I put the older version it runs just fine. And yes, I turned off the firewall / AV / malware programs

Your 2.1 version is bad. Redownload and extract.There is no difference at all at that part of the code since version 1. If yuo're getting that message it's probably Output directory missing or something.

[kb0sdq]

Well I ran the test on my stock G750JHA without closing any tsr's or anything score was 56941 (username on leader board is Dadoug) is that good for this lappy?
Everyone have a great St. Patties day and be safe
Happy ROG_n
Doug

[chrsplmr]

Doug .. Whoot !! Good ?? Straight Stock? NO Tweaks ? Look @ the other scores with the same equipment. TouchDown!


Brother MeanKeys .. Stunning my friend. Way to step up the game. .c.