cancel
Showing results for 
Search instead for 
Did you mean: 

OpenCL GPU&CPU?

GoosNL
Level 9
Hallo,

I'm new around here so here's a short intro...
Name--> Goos, from Holland
pc--> asus hero mb, 4670K, 16gb corsair vengeance LP, gtx780 dc2, psu coolermaster 750

Can i enable the cpu for openCL benchmark? or would this be cheating?
I have noticed that the cl benchmark does't improve the overall score much,
but i just would like to see the differance.

Here's my currect score

Goos
33287
| Asus VI Hero | 4670K + h100i | 16gb G.Skill tridentX 2400 | Asus DcII gtx780oc |
| and a Asus front base | 83360 realbench
13,288 Views
15 REPLIES 15

Nodens
Level 16
CPU OpenCL is automatically used if a driver for it is installed. And no it is not cheating:)
RAMPAGE Windows 8/7 UEFI Installation Guide - Patched OROM for TRIM in RAID - Patched UEFI GOP Updater Tool - ASUS OEM License Restorer
There are 10 types of people in the world. Those who understand binary and those who don't!

RealBench Developer.

GoosNL
Level 9
Thanks for the answer. I did see an improvement after installing a opencl driver, but i didn't know if i had 'check' the cpu box in the render benchmark for it to work.

Goos
| Asus VI Hero | 4670K + h100i | 16gb G.Skill tridentX 2400 | Asus DcII gtx780oc |
| and a Asus front base | 83360 realbench

GoosNL wrote:
Thanks for the answer. I did see an improvement after installing a opencl driver, but i didn't know if i had 'check' the cpu box in the render benchmark for it to work.

Goos


The benchmark is automated, no need to click anything after it's started 🙂

Too bad I didn't see these posts sooner. I rebenched my M6F & 4770K and noticed at 39X my GPU temp was 55+, as I went faster, the GPU temp went down. At 47x47x46x46 core and ring at 44, I was seeing no GPU activity at all, 0% GPU. The temp was 28-30, just like when the stress started. With my Nvidia control panel, I forced the Physx to GPU and now, at the same clock, my GPU is 100% at 56 degrees.

So, I'll turn it back to auto, but it's good to know I didn't fry my card or something! 😄

Cheers,

-Ambi
MB: Maximus VIII Hero
CPU:Intel i7-6700K OC @ 4.7 GHz
Mem: 32GB Corsair Vengeance LPX @ 3600 MHz
Vid: EVGA GTX980 Ti SC@ 1530MHz
SSD:RAID1&0 Samsung 256G 840 Pro

HDD: RAID1 6TB Ultrastar 7K6000
PSU: Corsair AX1200i
Case:Corsair 600T, mod for roof rad

Custom Loop:
Block:EK Supremacy Clean CSQ, Copper
Rads:AlphaCool ST30 360 & 120
Fans: 4 X Enermax CLUSTER Advance, Bitfenix Spectre Pro 200mm, KingWin DB122
Pumps:2 X MCP 35x in series
Tubing:Tygon 2475 1/2" ID X 3/4" OD

BTW, when the OpenCL traffic goes to my CPU, the stress test seems to work OK...with one exception. The LuxMark application window doesn't display any info about the hardware, and the window never has any graphics drawn in it. I guess that makes sense if there's some "virtual" display that OpenCL operates on when in CPU mode, but I'd have expected some message or other indication that the test was going to CPU instead.

Thanks,

-Ambi

Ambidexter wrote:
Too bad I didn't see these posts sooner. I rebenched my M6F & 4770K and noticed at 39X my GPU temp was 55+, as I went faster, the GPU temp went down. At 47x47x46x46 core and ring at 44, I was seeing no GPU activity at all, 0% GPU. The temp was 28-30, just like when the stress started. With my Nvidia control panel, I forced the Physx to GPU and now, at the same clock, my GPU is 100% at 56 degrees.

So, I'll turn it back to auto, but it's good to know I didn't fry my card or something! 😄

Cheers,

-Ambi
MB: Maximus VIII Hero
CPU:Intel i7-6700K OC @ 4.7 GHz
Mem: 32GB Corsair Vengeance LPX @ 3600 MHz
Vid: EVGA GTX980 Ti SC@ 1530MHz
SSD:RAID1&0 Samsung 256G 840 Pro

HDD: RAID1 6TB Ultrastar 7K6000
PSU: Corsair AX1200i
Case:Corsair 600T, mod for roof rad

Custom Loop:
Block:EK Supremacy Clean CSQ, Copper
Rads:AlphaCool ST30 360 & 120
Fans: 4 X Enermax CLUSTER Advance, Bitfenix Spectre Pro 200mm, KingWin DB122
Pumps:2 X MCP 35x in series
Tubing:Tygon 2475 1/2" ID X 3/4" OD

Ambidexter wrote:
BTW, when the OpenCL traffic goes to my CPU, the stress test seems to work OK...with one exception. The LuxMark application window doesn't display any info about the hardware, and the window never has any graphics drawn in it. I guess that makes sense if there's some "virtual" display that OpenCL operates on when in CPU mode, but I'd have expected some message or other indication that the test was going to CPU instead.


That means there is a problem with your system. Bad OpenCL driver for the CPU most likely. When your system is fine it will show everything.
RAMPAGE Windows 8/7 UEFI Installation Guide - Patched OROM for TRIM in RAID - Patched UEFI GOP Updater Tool - ASUS OEM License Restorer
There are 10 types of people in the world. Those who understand binary and those who don't!

RealBench Developer.

Anyone have a link for opencl AMD and Intel drivers?

AMD - 8350 and 9370
Intel - 4770k and 4670k

Thanks!
MEGAStarkey

Intel i7 4770kOC @ 4.6 / 1.25v - Maximus VI Extreme - 16gb Team Xtreem @2400
Gigabyte R9 290x Windforce OC
Intel i7 4670kOC @ 4.2 - ASUS Z97i Plus - 8gb Crucial Ballistix@1600
ASUS 660GTX
AMD FX8350OC @ 4.8 Ghz Stable - Crosshair V Formula-Z -8gb Crucial Ballistix @1600
ASUS 660GTX

for opencl intel drivers just google-->opencl driver intel

See post below...
| Asus VI Hero | 4670K + h100i | 16gb G.Skill tridentX 2400 | Asus DcII gtx780oc |
| and a Asus front base | 83360 realbench

GoosNL wrote:
for opencl intel drivers just google-->opencl driver intel 😛 or KLIK


That's not the driver. As MarshallR said the driver is part of the Graphics driver package. The link above is the OpenCL SDK (Software Development Kit) and it's for developing OpenCL applications.
RAMPAGE Windows 8/7 UEFI Installation Guide - Patched OROM for TRIM in RAID - Patched UEFI GOP Updater Tool - ASUS OEM License Restorer
There are 10 types of people in the world. Those who understand binary and those who don't!

RealBench Developer.