Results 1 to 10 of 18
-
02-15-2014 02:52 AM #1ROG Member Array
- Join Date
- Feb 2014
- Reputation
- 10
- Posts
- 8
Stuck at 800mhz ... Is this normal?
Asus ROG Hero w/4770k CPU 16gb of ram.
Everything was fine until I overclocked using the ai suite iii to 4.2ghz..the only issue I see is that everywhere in the OS it's stating that the clock is 800mhz... If I launch CPU z it says 4.2ghz. Everywhere else even in the bios it says 800 MHz...
I though that loading up prime95 that it would go up but it doesn't... Again CPU z shows the correct ghz and so does ai suite..it also shows 4.2 ghz.
If I reset the bios to defaults everything goes back to normal..
Is this normal to see 800mhz after using the ai suite??
-
02-15-2014 03:50 AM #2Moderator Array Nate152 PC Specs
Nate152 PC Specs Motherboard ROG Maximus IX Code Processor i7-7700k 5.2GHz Delidded Memory (part number) 16GB G.Skill Trident Z 4025MHz 17-17-17-39-2T Graphics Card #1 Titan Xp - EKFC waterblock Graphics Card #2 Titan Xp Sound Card ROG SupremeFX 2015 Monitor HP ZR30w Storage #1 Toshiba OCZ VX500 256GB CPU Cooler Swiftech Apogee GTZ Case Thermaltake Armor+ VH6000 Power Supply EVGA Supernova 1600w Titanium Keyboard Cyberpower Skorpion K2 Mouse Razer Basilisk Headset Sennheiser HD6XX / Modmic 5 OS Windows 10 Home 64 bit Accessory #1 Asus optical drive Accessory #2 Koolance ERM-2K3U
- Join Date
- Feb 2013
- Reputation
- 308
- Posts
- 16,427
Hi stanglx, I see ai suite causing problems like this to a lot of people, Try uninstalling it in add/remove programs then run this cleaner. Restart your pc and check the cpu target speed in your bios.
http://rog.asus.com/forum/showthread...te-III-Cleaner
-
02-15-2014 11:44 AM #3iron man Array
- Join Date
- Aug 2011
- Reputation
- 243
- Posts
- 6,129
the best way to OC is to do it inside BIOS.
aisuite can be a buggy program at a time.
-
02-15-2014 01:12 PM #4imMortal Kombatant Array Myk SilentShadow PC Specs
Myk SilentShadow PC Specs Motherboard ASUS Rampage IV Formula Processor Intel i7 3930K Memory (part number) 8GB Corsair XMS3 1600 Graphics Card #1 ASUS Radeon 7970 3GD5 Sound Card ROG Xonar Phoebus Monitor Samsung SyncMaster SA300 Storage #1 Corsair Neutron 128GB Storage #2 Seagate 2TB CPU Cooler Corsair A50 Pro Air Cooler Case BitFenix Merc Alpha Power Supply Thermaltake Litepower 700W Keyboard Alienware TactX Keyboard Mouse Tesoro Gandiva H1L OS Win7 Ultimate x64 
- Join Date
- Jan 2012
- Reputation
- 266
- Posts
- 5,241
800 MHz is the idle speed, in Windows your power plan i'm willing to bet is set at balanced and will only clock higher to 4.2 under load. This is normal as is Windows reporting 800MHz...just ignore it from Windows and only verify with CPU-Z when your CPU is under load.
-
02-15-2014 01:59 PM #5ROG Member Array
- Join Date
- Feb 2014
- Reputation
- 10
- Posts
- 8
The power plan was the first thing I checked..it's set to high performance...
CPUz shows 4.2 ghz...
I went into the bios and the min max CPU shows 800mhz for both where you can see the profile of the CPU. It looks like it down clocks the CPU but uses boost to get it to the 4.2 ghz... I also compared the parameters it changes from default and there were only a couple of bios parameters it changed...which should not affect the min and for sure should not set the max CPU to 800 MHz...I'm suspecting that the ai suite is not just change the bios but does something outside the bios...
I love fan expert...how can I just reset the hing to defaults...I see it's not just bios but some other hardware management function..
Originally Posted by Myk SilentShadow
-
02-15-2014 02:10 PM #6ROG Guru: Grand Master Array
- Join Date
- Oct 2012
- Reputation
- 339
- Posts
- 15,254
Take screenshots of your entire Extreme Tweaker tab for me. Use an USB pendrive to save them on then upload them here.
-
02-15-2014 02:38 PM #7imMortal Kombatant Array Myk SilentShadow PC Specs
Myk SilentShadow PC Specs Motherboard ASUS Rampage IV Formula Processor Intel i7 3930K Memory (part number) 8GB Corsair XMS3 1600 Graphics Card #1 ASUS Radeon 7970 3GD5 Sound Card ROG Xonar Phoebus Monitor Samsung SyncMaster SA300 Storage #1 Corsair Neutron 128GB Storage #2 Seagate 2TB CPU Cooler Corsair A50 Pro Air Cooler Case BitFenix Merc Alpha Power Supply Thermaltake Litepower 700W Keyboard Alienware TactX Keyboard Mouse Tesoro Gandiva H1L OS Win7 Ultimate x64
- Join Date
- Jan 2012
- Reputation
- 266
- Posts
- 5,241
You need to disable Intel Speedstep and Turbo Boost. This will make your OC 24/7. You'd have to set Voltages to Auto, or offset to allow the CPU to throttle down when in idle.
-
02-15-2014 04:25 PM #8ROG Member Array
- Join Date
- Feb 2014
- Reputation
- 10
- Posts
- 8
Here are the screen shots..
-
02-15-2014 04:32 PM #9Moderator Array Nate152 PC Specs
Nate152 PC Specs Motherboard ROG Maximus IX Code Processor i7-7700k 5.2GHz Delidded Memory (part number) 16GB G.Skill Trident Z 4025MHz 17-17-17-39-2T Graphics Card #1 Titan Xp - EKFC waterblock Graphics Card #2 Titan Xp Sound Card ROG SupremeFX 2015 Monitor HP ZR30w Storage #1 Toshiba OCZ VX500 256GB CPU Cooler Swiftech Apogee GTZ Case Thermaltake Armor+ VH6000 Power Supply EVGA Supernova 1600w Titanium Keyboard Cyberpower Skorpion K2 Mouse Razer Basilisk Headset Sennheiser HD6XX / Modmic 5 OS Windows 10 Home 64 bit Accessory #1 Asus optical drive Accessory #2 Koolance ERM-2K3U
- Join Date
- Feb 2013
- Reputation
- 308
- Posts
- 16,427
Looks like it is working now. Cpu target speed is showing 4200.2 MHz.
-
02-15-2014 04:42 PM #10ROG Member Array
- Join Date
- Feb 2014
- Reputation
- 10
- Posts
- 8
Yes... that improved after redoing it one more time... even though everything else still shows the same... Keep in mind CPUz ALWAYS showed 4.2Ghz... Only the Windows Apps now show 800 Mhz AND the bios currently shows 800Mhz as seen as CPU in screen shot 1.
Now the question is, how can I tell it to stay at 4.2Ghz? OR at a minimum at 3.5Ghz.. t
Reply With Quote
