Results 1 to 3 of 3

Thread: OC Panel - Help

  1. #1
    New ROGer Array
    Join Date
    Mar 2014

    OC Panel - Help


    I just got my Asus Maximus VI Extreme and I installed the OC Panel in the normal mode.
    For some reason the CPU temp and RPM are always Zero. I updated the OC panel firmware and installed the connect plus but no luck. I also have the Corsair H100i with the corsair link.
    Does anyone know if this may be the issue? Any ideas?
    I'm pretty cure I'm missing something basic...

    Thank you in advanced.

    OS: Win 8.1 Pro 64bit
    BIOS: 1302
    CPU: 4770k
    RAM: 16GB 1866
    GPU: GTX 780TI DCU II,
    CPU Cooler: Corsair H100i

  2. #2
    New ROGer Array
    Join Date
    Mar 2014

    Turns out the cable was not properly connected to the OC panel *ashamed*
    I shall declare myself ashamed and this thread can be closed

  3. #3
    ROG Guru: Green Belt Array Tokens210 PC Specs
    Tokens210 PC Specs
    MotherboardMaximus VI Formula
    Memory (part number)F3-2400C10D-16GTX Gskill TridentX (8gbx2)
    Graphics Card #1EVGA GTX 550TI 1gb
    Sound CardSupreme FX on board
    Storage #12x Samsung Evo 120gb
    Storage #2WD 1TB
    CPU CoolerSwiftech H320
    CaseCoolermaster HAF 932 Advanced
    Power SupplyCorsair HX850 80+ Platinum
    OS Windows 7 64-bit

    Join Date
    Feb 2014

    you should also know tho incase you dont already corsair link and asus software dont play nice

    for awhile they may seem to be working fine but they can both monitor and control the same things which at somepoint usually results in head bumping and crashes
    CoolerMaster HAF 932 Advanced/ Maximus VI Formula/ I7-4770K/Swiftech H320/ Corsair HX850/ G.Skill Trident X (2x8) 16gb 2400MHz/ 2x 840 EVO 120gb(Raid 0)/ WD 1TB HDD (Backup/Storage)/ EVGA GTX 1gb 560 TI/ Asus 12x bluray combo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts