cancel
Showing results for 
Search instead for 
Did you mean: 

"BATTLEFIELD 3" PC Case Mod

MonsterMawd
Level 12
Here is the "BF3" theme case mod in anticipation of Battlefield 3: BF3 release on 10.25.2011 by Electronic Arts. Fractal Design's Arc Mid tower case was chosen for the project and this PC will be displayed at Fractal's booth, on the main floor of 2012 CES, in Las Vegas

Investigative review of Fractal Design new "Arc" Midi Tower Case.




some of the pc case modding products we may be using for this project



Fighter Pilot Toggle Switches, http://www.mnpctech.com/spdprtToggle.html



To re-assemble the Corsair 900D chassis, I used these Black Powder coated PC chassis pop rivets



http://www.mnpctech.com/Pop_rivets_for_computer_case.html

Pop Rivet Gun

http://www.mnpctech.com/Pop_Rivet_Guns.html



Creating the riveted exterior

Black PC Sleeving Kit

http://www.mnpctech.com/PC_Cable_Wire_Sleeving_Kit.html

Fractal design Arc Mid tower fully dismantled for custom paint.



The name badge in the bezel was filled with Evercoat's Everglass" Fiberglass "short hair" filler.



After sanding the filler with Medium Grit sandpaper..



Scuffing surface of steel chassis parts, plastic bezel with Red Scothbrite Pad, to create paint adhesion for the Primer.




Dissected and Magnified each segment from camouflage pattern on 8.5" x 11" paper. Each segment was traced and cut in cardboard for individual stencils.



RUSTOLEUM Specialty series "camouflage" paints. I purchased these from Home Depot



Camouflage paint job is finished.

The FD front grill is very mush like Mnpctech's Modders Mesh, http://www.mnpctech.com/ModdersMesh.thm.jpg



I'll be installing 120mm Logysis Green LED cooling fans, http://www.mnpctech.com/LED_Computer_Fan.html






Camouflaged motherboard tray? Yes, the entire interior was painted.



For a rugged military look, we chose these recessed PC case handles, http://www.mnpctech.com/BlackRecessedHandle.html



The recessed PC handles are ready for installation and spring loaded, so they don't flop while transporting your PC.



Using stencil included with handles along with measuring square to determine exact location for the recessed PC handles



Using 1.5" Dremel reinforced cutting wheel to cut opening for recessed PC handles




Using 1/4" drill bit for mounting holes of the recessed handles.



Cutting 3/16" thick aluminum Diamond Plate to use as accent plates for the handles.



Khaki base coat applied to the Diamond Plate accent plates.



Recessed PC handles and diamond plate installed and painted.




Airbrushed effect of side panel being peeled back by Mnpctech custom painter, Brad Galvin.



Brad's weapon of choice, Iwata's HP-CH airbrush gun.



Glowing effect airbrushed on the BF3 Marine.



Black outline airbrushed on BF3 Marine. A flat clear will be applied over the finished mural.



with Brad's guidance, I airbrushed the bullet holes and scratched paint effects on the access panel. I started with the easy task of filling the BF3 stencil on the left side panel.

39,263 Views
47 REPLIES 47

Steven_belfast
Level 7
Dam thats a sexy case.
Well done folks looks nice.
| Asus Maximus IV Extreme | Intel 2600K | Corsair Hydro H100i GTX |
| XFX Radeon R9 290X Black Edition | G.Skill RipJawsX 8GB |
| Corsair Force Series 3 120GB | Corsair Obsidian 800D (6GB/s) |
| Corsair Professional Series AX1200 |

Jaytheredneck1
Level 8
Wow that is awesome. I so wanted to build my BF3 rig with a military theme, but I'm no painter and I could not find anything even remotely resembling a militaristic looking case on the market. That was the final deciding factor that m,ade me change my plans and switch from a sabertooth to a CHV. I love those handles, they look like ammo box handles.
Crosshair V Formula 990FX 0506 Bios - Phenom II X6 1100T - Gskill Sniper 1600MHz (4x4GB) - Saphire Radeon 6770 - OCZ Agility 3 60GB - WD Black 1TB - Cooler Master V6GT - Antec Dark Fleet 85 - Antec CP-850 - Windows 7 Ultimate 64

Retired
Not applicable
that is some awesome work! what mobo do you plan to use? a sabertooth with the thermal armor painted camo would be awesome!

Brian@ASUS wrote:
that is some awesome work! what mobo do you plan to use? a sabertooth with the thermal armor painted camo would be awesome!


I guess you already see the one Bill have done ?

Jaytheredneck1
Level 8
Yes it would Brian, yes it would.
Crosshair V Formula 990FX 0506 Bios - Phenom II X6 1100T - Gskill Sniper 1600MHz (4x4GB) - Saphire Radeon 6770 - OCZ Agility 3 60GB - WD Black 1TB - Cooler Master V6GT - Antec Dark Fleet 85 - Antec CP-850 - Windows 7 Ultimate 64

chrsplmr
Level 18
MM, Your top shelf Mods never cease to amaze and inspire me. ThankYou.

Brian, yes....SaberTooth is the perfect board for that, in my humble opinion also.
Or that new Rampage that you and Raja were talking about...
What were the specifics of that again?
Could you re-post those close up pics again?
hahahahhaa(Hey, I had to give it a shot brother.hehehe)

The SaberTooth would be really perfect.

Area_66
Level 11

G4MER
Level 9
I have been watching this MOD on Facebook.. I think its Outstanding!
WINNER Of: iBUYPOWER / ASUS - GAMER PALADIN Z68

CPU - 2nd Generation Intel® Core™ i7-2600K Processor
MoBo - Maximus IV Extreme-Z
ODD - BLU-RAY Reader Combo Drive
PSU - 850W Extreme Gaming Series Power Supply
VGA - ASUS GTX 570 DirectCU II (1 GB)
Memory - 8GB DDR3-1600 Memory – Corsair Vengeance
Audio - ASUS Xonar DX
Networking - Killer 2100 Gaming Network Card
Hard Drive - 60GB SSD SATA III 6Gb/s – Single Drive

( I WAS A G4MER, WHEN G4MING WAS UNCOOL )

Thank you! whats your name on fb?

the window frame is upcoming modular billet kit I'm working on..

Should be listed on Mnpctech in few weeks