Results 1 to 4 of 4
  1. #1
    New ROGer Array
    Join Date
    Jun 2014
    Reputation
    10
    Posts
    2

    Z87 deluxe infinite loop q codes

    Hi
    I tried to overclock an Asus z87 deluxe Intel i7 4770k on it. It was perfectly running before the overclock. bios version 1507
    I just change the CPU multiplier to 46 without touching the voltage.
    At the first boot the win 8 crashed. Then it started an infinite boot crash restart without ever arriving to the bios splashcreen. However the system was beeping all the time in a loop.
    I pressed the clear CMOS hoping to reset everything, but the following happens.
    System start firing all fans.
    Q codes loop on different codes (10-15 repeating all the time).
    CPU and dramm led flash alternatively.
    Tried to pull out battery and clear CMOS.
    How do I exit this nightmare?

  2. #2
    ROG AirWays Captain Array TenBlade's Avatar
    Join Date
    Oct 2012
    Reputation
    45
    Posts
    815

    Try booting with one ram stick at a time, see if one of them is faulty, look in manual to see which slot is recommended.
    Alternatively install new BIOS, or reinstall current, now I´m not familiar with your particular board, but if my older board can do that just with a USB-key, I´d presume yours could too.

  3. #3
    New ROGer Array
    Join Date
    Jun 2014
    Reputation
    10
    Posts
    2

    @tenblade that was a great idea. The bios update failed, but at least it triggered something and the machine started again. GREAT AND THANKS!

  4. #4
    ROG AirWays Captain Array TenBlade's Avatar
    Join Date
    Oct 2012
    Reputation
    45
    Posts
    815

    Glad it worked out, Masix. And good luck on your overclock. There´s a lot of reading material here to guide you.
    ROG on!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •