- last edited on by
ROGBot
Hi everyone,
Like some of you may know,i made the thor desk last year 2013(wich got me the build of the week on linustechtips)
After using the desk for almost a year now,i thought to myself,lets make some changes(since there were some things i always wanted to change,
and i wanted to do it with acrylic Tubing)
So i will be sharing that process with you,i hope you will like it,i certanly love doing it 😉
ToDoList:
1)Lower the legs
2)More Radiators,for better cooling
3)Acrylic Tubing (A must have if you have done it before)
4)All the fittings alike(the last time i went with what i had,EK,Bitspower and koolance)now only bitspower
5)Extra Compartment for poweradapter with 10 connectors ,Router,and External HDD's)
6)SSD mounting cage (build into the Wall of the desk)
7)Usb Connection on the outside of the Case(i have to see with that when i get further along)
8)Cutom Acrylic Motherboard tray wit LED
9)New Fans From Corsair (Corsair AF 120 LED blue)+
10)Vandal Power and reset Button
11)Drain and Fill Port ( A must have on any watercooling Pc,makes Live alot easyier)
12)And probably find some more ideas as i go (wich i will of course keep you posted on)
SystemSpecs:
CPU:Intel 3770K OC 4,9Ghz (Update to 4790k)
RAM:Corsair Dominator Platinum 1866Mhz OC 2133Mhz@1,6v
MB:Asus Sabertooth Z77 (Update to Asus Maximus VII Hero )
GPU:Asus 7970 DCII Crossfire OC 1200\1600mhz
PSU:Corsair HX1000i
HDD:Western Digital 2TB Black Edition
SSD:2 x 120GB Samsung 840 pro RAID0,2 x 120GB Corsair Force LS RAID0,
FANS: Corsair AF 120 Blue Led,Corsair SP 120 High flow,
WaterCoolingSpecs:
CPU:Ek Supremacy Clear Plexi polished (copper interior)
GPU:EK DCII Block
HDD:Bitspower Silver shining,
RES:Bitspower 350ml Clear pexi
FITTINGS:Primochill Revolver Silver
ADAPTERS:Bitspower 90° Silver shining,Bitspower 90° single rotary Silver shining,Bitspower black extenders,Bitspower Plexi T Adapters,
TUBING:Primochill 10mm ID / 12mm OD,Shackemodz 10mm OD/12mm ID,
PUMPS:2 x Alphaclool VPP655 (with EK D5 X-Top Acetal Pumptop )
RADIATORS:EK Coolstream PE 240mm,EK Coolstream PE 360mm,EK Coolstream XTX 360mm,BlackIce GTX Extreme 360mm
SENSOR:Bitspower Flowsensor Silver shining.
Bitspower Full board waterblock for VII Hero With Bitspower armor 🙂
And maybe i will go shop some more as i go.
Sponsors:
BEFORE 2013:my Appologies for bad Picture Qualaty/didn't have my 650D than,Future Pictures will be Better.
STAY TUNED!!!
Like some of you may know,i made the thor desk last year 2013(wich got me the build of the week on linustechtips)
After using the desk for almost a year now,i thought to myself,lets make some changes(since there were some things i always wanted to change,
and i wanted to do it with acrylic Tubing)
So i will be sharing that process with you,i hope you will like it,i certanly love doing it 😉
ToDoList:
1)Lower the legs
2)More Radiators,for better cooling
3)Acrylic Tubing (A must have if you have done it before)
4)All the fittings alike(the last time i went with what i had,EK,Bitspower and koolance)now only bitspower
5)Extra Compartment for poweradapter with 10 connectors ,Router,and External HDD's)
6)SSD mounting cage (build into the Wall of the desk)
7)Usb Connection on the outside of the Case(i have to see with that when i get further along)
8)Cutom Acrylic Motherboard tray wit LED
9)New Fans From Corsair (Corsair AF 120 LED blue)+
10)Vandal Power and reset Button
11)Drain and Fill Port ( A must have on any watercooling Pc,makes Live alot easyier)
12)And probably find some more ideas as i go (wich i will of course keep you posted on)
SystemSpecs:
CPU:Intel 3770K OC 4,9Ghz (Update to 4790k)
RAM:Corsair Dominator Platinum 1866Mhz OC 2133Mhz@1,6v
MB:Asus Sabertooth Z77 (Update to Asus Maximus VII Hero )
GPU:Asus 7970 DCII Crossfire OC 1200\1600mhz
PSU:Corsair HX1000i
HDD:Western Digital 2TB Black Edition
SSD:2 x 120GB Samsung 840 pro RAID0,2 x 120GB Corsair Force LS RAID0,
FANS: Corsair AF 120 Blue Led,Corsair SP 120 High flow,
WaterCoolingSpecs:
CPU:Ek Supremacy Clear Plexi polished (copper interior)
GPU:EK DCII Block
HDD:Bitspower Silver shining,
RES:Bitspower 350ml Clear pexi
FITTINGS:Primochill Revolver Silver
ADAPTERS:Bitspower 90° Silver shining,Bitspower 90° single rotary Silver shining,Bitspower black extenders,Bitspower Plexi T Adapters,
TUBING:Primochill 10mm ID / 12mm OD,Shackemodz 10mm OD/12mm ID,
PUMPS:2 x Alphaclool VPP655 (with EK D5 X-Top Acetal Pumptop )
RADIATORS:EK Coolstream PE 240mm,EK Coolstream PE 360mm,EK Coolstream XTX 360mm,BlackIce GTX Extreme 360mm
SENSOR:Bitspower Flowsensor Silver shining.
Bitspower Full board waterblock for VII Hero With Bitspower armor 🙂
And maybe i will go shop some more as i go.
Sponsors:
BEFORE 2013:my Appologies for bad Picture Qualaty/didn't have my 650D than,Future Pictures will be Better.
STAY TUNED!!!
Here are the radiator mounts (since i wanted to put in some extra cooling,
240 and 360 EK PE Coolstream side by side,since they are quite slim i was abler to put the in the small compartment where the powersupply will be.
And I already shortened the legs ,since i want to be able to mount 2 extra 24" screens on top of the 2 x 27",
so i dont want to have the setup to high,took off 10cm .
240 and 360 EK PE Coolstream side by side,since they are quite slim i was abler to put the in the small compartment where the powersupply will be.
And I already shortened the legs ,since i want to be able to mount 2 extra 24" screens on top of the 2 x 27",
so i dont want to have the setup to high,took off 10cm .
HUGE Thank you To Corsair for beeing so kind and sending me this Carepackage.
LOVE IT!
LOVE IT!
SSD Drive Cage for the 2 Corsair drives (in Progress)
And i came to a conclusion ,
its dabgerous to go shopping 🙂
I needed one drill bit,
bought the one ,but ended up with a whole set extra,with about a hundred bits 😉
And i came to a conclusion ,
its dabgerous to go shopping 🙂
I needed one drill bit,
bought the one ,but ended up with a whole set extra,with about a hundred bits 😉
here are the parts in progress for the compartment under the desk,
had to put on some Wood dye,so the colours match.'
had to put on some Wood dye,so the colours match.'
Work in progress on the motherboardtray.
Sweet, sweet skills nos85.
Looking forward to the successful outcome.
If I have neglected to say so before, Welcome to ROG.
Best of Luck. .c.
Looking forward to the successful outcome.
If I have neglected to say so before, Welcome to ROG.
Best of Luck. .c.
Working on the Door for the Underthedesk Compartment for router and power adapter.
This will be the door handle.
This will be the door handle.
Under the Desk compartment almost done (on the Thor D3sk)
Some Detail work left.And maybe integrate some more ideas.
Some Detail work left.And maybe integrate some more ideas.
