Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Sabretooth 990FX and Kingston 4x4 KHX1333 memory issue

trey915
Level 7

‎08-06-2014 10:18 PM - last edited on ‎03-05-2024 10:33 PM by Community Admin

I just purchased the Sabretooth 990FX mobo and got everything hooked up. When I powered on it beeps constantly and the LED next to the MemOK button is lit constantly. I pressed the button and it went through the various attempts to use the DIMMS. I tried each DIMM separately to see if maybe I just had a bad DIMM. I looked in the manual and it says that Kingston 1333 DIMMS should be compatible but it gives a different part number. I am using the KHX1333 from Kingston. Has anyone else tried to use these successfully or is there something I need to do to get them to work or am I just going to need to purchase new DIMMs?

Thanks/
Labels:
0 Kudos
2,799 Views
1 REPLY 1

MeanMachine
Level 13

‎08-08-2014 10:56 PM

Hi trey915 and Welcome to ROG

If you do not have the latest Bios then I suggest you first update then set to default.
Should the Bios still fail to recognize your DIMMs, then to save a lot of time and frustration, Swap them out with ones listed on the QVL.
We owe our existence to the scum of the earth, Cyanobacteria

My System Specs:

MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
CPU:AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t
Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2

[/HR]
0 Kudos