Have you updated your Bios
xxLoTeKxx as I cannot understand why UEFI boot option is unavailable. Unless you changed at some point from UEFI to Legasy then I believe you have to reflash.
It is also said that only one SSD should be installed during setup.
There is a video for UEFI installation:
https://www.youtube.com/watch?v=amwujljr7pYHave you read this:
http://technet.microsoft.com/en-au/library/dn336946.aspxAnd this:
http://technet.microsoft.com/en-au/library/hh825112.aspxYou'll have to clean install for UEFI, Once you set the system for UEFI booting, boot from a USB flash drive or DVD,
If your SSD has already been used, delete all the partitions & create a new one.
To make a UEFI bootable USB drive,
1. Plug in your USB flash drive, and run Rufus
2. Check the option “Create a bootable disk using: ISO Image“, and click the icon next to it to pick up the ISO image file.
4. Select “GPT partition scheme for UEFI computer“
For Rufus go here:
http://rufus.akeo.ie/As this is new to most of us, Good Luck and your feed back will be most welcome.
We owe our existence to the scum of the earth, Cyanobacteria
My System Specs:
MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
CPU:AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t
Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2
[/HR]