Results 1 to 4 of 4
  1. #1
    ROG Guru: White Belt Array rolldog PC Specs
    rolldog PC Specs
    MotherboardAsus Maximus IX Extreme
    ProcessorIntel i7-7700K w/ monoblock
    Memory (part number)32GB G. SKILL TridentZ DDR4 PC4-32000 4000Mhz
    Graphics Card #1Gigabyte AORUS 1080 Ti Extreme (full waterblock)
    Monitor2017 Sony 55" A1E OLED
    Storage #1Intel Optane 32GB Cache Drive w/ 8TB Seagate
    Storage #2Samsung 960 Pro M.2 NVMe 1TB
    CPU CoolerBitspower Monoblock
    CaseIn Win Tou 2.0
    Power Supply1065-SIV
    Keyboard Corsair Vengeance K70 RGB
    Mouse Corsair Gaming Sabre Laser RGB Gaming Mouse
    Mouse Pad Corsair MM800
    Headset/Speakers Sony 55" A1E
    OS Windows 10 Pro
    Network RouterUbiquiti UniFi USG Pro 4
    Accessory #1 Alphacool Cape Corp Coolplex HF metall chrome reservoir
    Accessory #2 Laing DDC w/ brushed aluminum mod top
    Accessory #3 Dual Aquacomputer Airplex 360mm radiators

    Join Date
    May 2014
    Reputation
    10
    Posts
    98

    Painting my motherboard

    I had to send my Maximus VI Formula ROG MB off the be RMAd (kept getting error code 55), but they've fixed it and I got it back last week. When I opened the box, I noticed that they didn't put the armor back on the MB. I called the next day, and they apologized and said they would mail it to me. Well, while my MB was getting repaired, I've bought quite a few upgrades to my system starting with the case, then a custom water cooling system, all sleeved cables, etc, but the entire theme is black and green so the red on the MB throws everything off. I've ordered a can of Plasti Dip, which is similar to spray paint, except when it dries, it can be peeled off if needed. It's not permanent. I bought the same color green as the rest of the pieces will be in my system. So, I was thinking about painting the PCIe slots and the RAM slots, but I don't want to take a chance of getting any into the slots and then my board not work.

    If any of you have ever painted components for a build (or anyone else with an opinion that is), could you please share your thoughts about me possibly putting painter's tape along the top to make sure none gets into the slots or if I should not paint the slots and all the other small parts on the board green from red and just paint all the armor green when it comes in? I was thinking if I just painted all of the armor, then it might be enough to distract from the red on the MB. Thoughts?

  2. #2
    ROG Enthusiast Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    44

    i painted a lot of components like parts of the case, SSD's, Fan's etc. on my actual Project, but i wouldn't recommend painting a Mobo cuz it's a very tricky job.
    how about simply throwing more hardware at the board to get the red slots covered as a workaround?!

  3. #3
    ROG Member Array
    Join Date
    May 2014
    Reputation
    10
    Posts
    10

    Make sure you use lead paint...got to use lead paint

  4. #4
    ROG Member Array
    Join Date
    Aug 2012
    Reputation
    15
    Posts
    14

    Hello there.
    I can help you with this. I have done it myself with success and it still runs today with no problems. Keep in mind you will obviously be voiding your warranty.

    The motherboard has hot spots and so you can damage it if you lay on a thick coating of some kind. Absolutely DO NOT use spray dip on it..
    Find a product called Conformal Coating in a spray can. It's a product widely used for acting as a barrier for electronics that are put in harsh environments, such as wet areas and places that generate static. Normally they just coat it and walk away, but, what people don't know is that it can be top-coated. i.e. painted.

    To see one that was done you can view my site at BSMODS.com and there is a blacked out mod in the gallery.

    Cover areas that should not get anything on them such as connections, PCI slots, memory slots, etc. etc. This coating is a barrier so if you get it on your pins it will not make contact.

    Spray about 2 light fog coats of the Conformal Coating and let dry.

    Then a light coat of primer that is close to the final color. This is to achieve hiding of anything under it. Example= a piece of silver solder will show through at least 4 coats of paint without primer but it won't show through 1 light coat of primer and 2 light coats of paint.

    Now that the primer is on you can spray the actual paint. Make sure to keep it to a minimum to avoid trapping the heat in. You want to keep the tip back about 12 " and come at it from different angles so it will fog onto the surface and get into all the little hard to reach places.

    I recommend flat paint or maybe satin, but not glossy. The gloss actually creates more "skin" that traps heat.

    Again, do this at your own risk!!! No warranty will exist after this and you will need to closely monitor temps for the first few hours to make sure it's not too hot.

    Good luck.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •