ASUS GPU Tweak v2.6.9 for Graphics cards!

[Defin4ar]

New version of the ASUS GPU Tweak for Graphics cards...

2014/08/28 Update Here:
ASUS GPUTweak 2.6.9 for Win7 32/64, Win8.1 32/64

[trihy]

Hi, using latest version here.

I cannot get OC profiles applied at windows startup. How can I set this?

I´d checked all the possible options, but no luck.

[Defin4ar]

Hi, using latest version here.

I cannot get OC profiles applied at windows startup. How can I set this?

I´d checked all the possible options, but no luck.

You should go in the "Setting" tab => "Tune" tab => "Tune Setting", then check two first boxes to enable OC and to keep your tuned setting at start up.

[trihy]

Hi, I did that, but nothing changes... gpu tweak starts with no profile selected.

Win7 x64.

[Defin4ar]

Hi, I did that, but nothing changes... gpu tweak starts with no profile selected.

Win7 x64.

It might be because you haven't Save your profile when selecting OC setting values.

There's a tiny tab appearing near "G" letter in profile when you're sliding the values...just click on it and save whatever numbers 1, 2, 3, 4.

Make a test with clicking "G" (Gaming value) and see at reboot if it retains that setting.

PS: Numbers 1, 2, 3, 4 are empty "Profiles" that you have to Set & Save yourself.

Only "S" & "G" Profile are filled


Also got it on a Win7 x64 but nothing to do with that...

[trihy]

Hi, I´d tried saving profile at slot 1. And if I open gpu tweak and select "1", profile gets applied. So, I guess it´s saved right. But still looks like it´s not applied on start.

I´ll try with G slot to see what happens.

Thanks again

[Defin4ar]

Hi, I´d tried saving profile at slot 1. And if I open gpu tweak and select "1", profile gets applied. So, I guess it´s saved right. But still looks like it´s not applied on start.

I´ll try with G slot to see what happens.

Thanks again

When you slide to overclock your settings a little box appear call "Save" and you have to hit it before hit n° 1 box in the second row, as for example.

That's why it doesn't retain your setting when you hit directly the n° 1 box without hitting before "Save" box...

I recon the box "Save" is very very tiny and difficult to see near "G" but move your mouse around that letter after "Apply" to make it appears.

Cheers.