Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Aug 2014
    Reputation
    10
    Posts
    1

    Can't get above 85HZ with Radeon R290

    Just got the monitor from NewEgg today. CCC displays all refresh options but choosing anything above 85HZ causes the display to lose signal and go blank. Running Win 8.1 64 bit and AMD driver 14.10.1006 (most current). Have reseated all cables, rebooted, power cycled monitor, etc. but it is unstable above 85HZ.

  2. #2
    ROG Member Array
    Join Date
    Aug 2014
    Reputation
    10
    Posts
    20

    Try have a look at this thread

    http://rog.asus.com/forum/showthread...untry=&status=

    Had the same problem with my 1st one. Got it RMA'ed and then i could do 120Hz on another. 144Hz is not possible with AMD.

    But i ended up having same problems as you on the 2nd aswell. It turned on/off every 2-5 mins.

    Sell your AMD card and get nVidia instead - then everything works.... or return the monitor.. its not made for AMD apparently. Maybe down the line AMD will make driver support for it - but my life was to short to wait for that so i swapped GPU instead.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •