Page 24 of 25 FirstFirst ... 14 22 23 24 25 LastLast
Results 231 to 240 of 249
  1. #231
    ROG Guru: Grand Master Array
    Join Date
    Oct 2012
    Reputation
    339
    Posts
    15,255

    Then your problem is caused by an unstable overclock whether it be your CPU or memory. You will need to tweak it some more until you're stable.

  2. #232
    ROG Guru: Green Belt Array Qwinn PC Specs
    Qwinn PC Specs
    MotherboardRampage V Extreme - BIOS 3301
    Processor5930K @ 4.4 GHz Adaptive 1.27v / 4.2 Ghz cache Offset +0.27v / Input 1.92v / LLC7
    Memory (part number)G.Skill 32gb DDR4-2666Mhz 15-15-15-35-CR2 1.2v at XMP settings
    Graphics Card #1Gigabyte Gaming G1 980Ti OC to 1455Mhz Core 8000Mhz memory at Stock Voltage
    Graphics Card #2Gigabyte Gaming G1 980Ti SLI
    MonitorROG Swift PG278Q
    Storage #1Intel 750 PCIe 1.2TB
    Storage #2Sandisk Ultra II 960GB SSD
    CPU CoolerThermaltake Water 3.0 Ultimate (360" rad AIO)
    CaseThermalTake v71 Full Tower
    Power SupplyEVGA SuperNOVA 1200 P2
    Keyboard Saitek Eclipse II
    Mouse Razer A5090 Master of Destiny
    OS Windows 10 Professional 64 bit Build 10586

    Join Date
    Jul 2015
    Reputation
    46
    Posts
    670

    Isnt there a setting in the bios about voltage that specifically says to disable if you are overclocking? It is turned on by default. I'd been meaning to ask about it anyway. I am at work but will look it up when I get home.

  3. #233
    New ROGer Array coss82 PC Specs
    coss82 PC Specs
    MotherboardRampage V extreme u3.1
    ProcessorI7 5930k
    Memory (part number)Corsair lpx 3000Mhz
    Graphics Card #1Msi gtx 980TI
    Storage #1Crucial Mx250
    CPU CoolerCorsair h110 gtx
    CaseCorsair 780T
    Power SupplyCorsair hx850i
    OS Windows 10 home

    Join Date
    Dec 2015
    Reputation
    10
    Posts
    4

    Chino i reinstalled windows and just the drivers except corsair link for the AIO and it passed 30 min in realbench so it looks like it was some driver problems i hope. For how long should I run realbench to be sure?
    I will do the HCI memtest next to see if there will be any errors. I will leave it at stock settings for now to see how it behaves.
    Still thinking if I should install corsair link because it had some bugs, not reporting fan and pump speeds and having to run as administrator to make it work.
    Thank you for the help.

  4. #234
    ROG Guru: White Belt Array
    Join Date
    Nov 2012
    Reputation
    10
    Posts
    108

    Thanks Chino. Regarding my lock up screen with "American Megatrends" (ONLY) message, the LCD poster says 06 and 08 sometimes, these are PCH and CPU Initialization errors... Never seen such a thing before. Could you please give your opinion what this means? THX!!!!!

    (I always base my settings on the auto tuning results, just little tweaks, nothing crazy)

  5. #235
    ROG Guru: Grand Master Array
    Join Date
    Oct 2012
    Reputation
    339
    Posts
    15,255

    Quote Originally Posted by Qwinn View Post
    Isnt there a setting in the bios about voltage that specifically says to disable if you are overclocking? It is turned on by default. I'd been meaning to ask about it anyway. I am at work but will look it up when I get home.
    SVID. Some users favor disabling that option.


    Quote Originally Posted by coss82 View Post
    Chino i reinstalled windows and just the drivers except corsair link for the AIO and it passed 30 min in realbench so it looks like it was some driver problems i hope. For how long should I run realbench to be sure?
    I will do the HCI memtest next to see if there will be any errors. I will leave it at stock settings for now to see how it behaves.
    Still thinking if I should install corsair link because it had some bugs, not reporting fan and pump speeds and having to run as administrator to make it work.
    Thank you for the help.
    It's up to you. Some run it for hours others days. As for Corsair Link, I have no idea. I don't own any Corsair products.


    Quote Originally Posted by erix_jansen@hotmail.com View Post
    Thanks Chino. Regarding my lock up screen with "American Megatrends" (ONLY) message, the LCD poster says 06 and 08 sometimes, these are PCH and CPU Initialization errors... Never seen such a thing before. Could you please give your opinion what this means? THX!!!!!

    (I always base my settings on the auto tuning results, just little tweaks, nothing crazy)
    You said earlier that you had your CPU and memory overclocked. Make sure one is stable before overclocking the next. Then when you combine both at the end, tweak if necessary.

  6. #236
    ROG Guru: Green Belt Array Qwinn PC Specs
    Qwinn PC Specs
    MotherboardRampage V Extreme - BIOS 3301
    Processor5930K @ 4.4 GHz Adaptive 1.27v / 4.2 Ghz cache Offset +0.27v / Input 1.92v / LLC7
    Memory (part number)G.Skill 32gb DDR4-2666Mhz 15-15-15-35-CR2 1.2v at XMP settings
    Graphics Card #1Gigabyte Gaming G1 980Ti OC to 1455Mhz Core 8000Mhz memory at Stock Voltage
    Graphics Card #2Gigabyte Gaming G1 980Ti SLI
    MonitorROG Swift PG278Q
    Storage #1Intel 750 PCIe 1.2TB
    Storage #2Sandisk Ultra II 960GB SSD
    CPU CoolerThermaltake Water 3.0 Ultimate (360" rad AIO)
    CaseThermalTake v71 Full Tower
    Power SupplyEVGA SuperNOVA 1200 P2
    Keyboard Saitek Eclipse II
    Mouse Razer A5090 Master of Destiny
    OS Windows 10 Professional 64 bit Build 10586

    Join Date
    Jul 2015
    Reputation
    46
    Posts
    670

    Chino, no, wasn't talking about SVID. (Where/what is SVID?)

    I found it. Under Extreme Tweaker -> Internal CPU Power Management:

    "CPU Integrated VR Fault Management". Info says "Disable this item to prevent the FIVR (fully integrated voltage regulator) from tripping when doing overvoltage. It is recommended to disable this item when overclocking."

    Never seen anyone mention it before. Got any knowledge about it? Thanks in advance.

  7. #237
    ROG Guru: Green Belt Array Qwinn PC Specs
    Qwinn PC Specs
    MotherboardRampage V Extreme - BIOS 3301
    Processor5930K @ 4.4 GHz Adaptive 1.27v / 4.2 Ghz cache Offset +0.27v / Input 1.92v / LLC7
    Memory (part number)G.Skill 32gb DDR4-2666Mhz 15-15-15-35-CR2 1.2v at XMP settings
    Graphics Card #1Gigabyte Gaming G1 980Ti OC to 1455Mhz Core 8000Mhz memory at Stock Voltage
    Graphics Card #2Gigabyte Gaming G1 980Ti SLI
    MonitorROG Swift PG278Q
    Storage #1Intel 750 PCIe 1.2TB
    Storage #2Sandisk Ultra II 960GB SSD
    CPU CoolerThermaltake Water 3.0 Ultimate (360" rad AIO)
    CaseThermalTake v71 Full Tower
    Power SupplyEVGA SuperNOVA 1200 P2
    Keyboard Saitek Eclipse II
    Mouse Razer A5090 Master of Destiny
    OS Windows 10 Professional 64 bit Build 10586

    Join Date
    Jul 2015
    Reputation
    46
    Posts
    670

    Public service announcement: Disable EPU Power Saving. My adaptive 4.4Ghz 1.28v overclock that can withstand 8 hours of OCCT testing crashes within 3 minutes if I enable that setting. If I weren't already at my temperature comfort zone (max 74c in OCCT) with that OC, I'd feel obligated to retry all my previous higher OC attempts because I'm not sure when I had that setting enabled.
    Last edited by Qwinn; 12-26-2015 at 10:00 AM.

  8. #238
    ROG Member Array ZelmoQuad PC Specs
    ZelmoQuad PC Specs
    MotherboardR5E ............. BIOS: 3101
    Processori7-5930K
    Memory (part number)EVGA 16G-D4-2800-MR
    Graphics Card #1Titan-Z
    MonitorBENQ 3501 Curve 144Hz
    CPU CoolerC/M Glacier 240L
    CaseC/M Storm Stryker
    Power SupplyC/M V1000 1000W
    Keyboard G510 Keyboard & Nostromo
    Mouse MadCatz MMO 7
    Headset Corsair Void Wireless
    OS Win10 Pro 64-bit
    Network RouterNetgear NightHawk AC1900
    ZelmoQuad's Avatar
    Join Date
    Sep 2012
    Reputation
    10
    Posts
    23

    Honestly I don't understand why there are not more posts like this. If something works, post it. Thanks for your info.

  9. #239
    ROG Guru: Green Belt Array GoNz0- PC Specs
    GoNz0- PC Specs
    Laptop (Model)Dell XPS 9530
    MotherboardRampage V Extreme
    Processor5930
    Memory (part number)[Ripjaws 4] F4-2666C15Q-16GRR
    Graphics Card #1Asus Strix GTX980
    CPU CoolerEk Evo Supremacy
    CaseCorsair 800D
    Power SupplyEnermax 1250w revolution 85
    Keyboard Logitech 710+
    Mouse Razer Mamba 2012
    Headset Sennheiser PC350
    OS Windows 8.1 Pro
    Network RouterAsus AC68u

    Join Date
    Aug 2012
    Reputation
    24
    Posts
    568

    Quote Originally Posted by Arne Saknussemm View Post
    For 4.4 I have:

    Voltages your own of course

    Attachment 52111
    Thanks, I need to install 1902 and have a tinker with some new settings, will give your advanced settings a bash to see if I can get to 4.5!

  10. #240
    ROG 師傅 Array Arne Saknussemm PC Specs
    Arne Saknussemm PC Specs
    Laptop (Model)Laptop?...No way! (Model?...Jun Amaki...yes way!)
    MotherboardROG ZENITH EXTREME
    ProcessorTHREADRIPPER 1920X
    Memory (part number)F4-3200C14Q-32GVK
    Graphics Card #1GTX Titan X
    Graphics Card #2SLI is dead to me
    Graphics Card #3Tri SLI is even dead to Nvidia
    Graphics Card #4Quad SLI is dead to everybody especially my credit card
    Sound CardXonar Essence STX
    MonitorASUS ROG Swift PG279Q
    Storage #1Samsung 950 PRO
    Storage #22x OCZ VERTEX 3/2x WD Caviar Black 500GB / 2x WD RED 2TB
    CPU CoolerCustom Loop: Dual D5s, Dual Alphacool Monsta 480s, XSPC Raystorm Neo TR4, EK TitanX WaterBlock
    CaseNope!...Phobya Bench...let it all hang out man!
    Power SupplySeasonic SS-1200XP3
    Keyboard Logitech G810 or Fender Rhodes Electric Piano (MKI 73)
    Mouse G502 or Speedy Gonzalez...not Mickey...don't do Disney!
    Headset ...firmly on neck
    Mouse Pad Mouse don't got his own pad man...lives with me
    Headset/Speakers Edifier Spinnaker...or you mean the speakers in my head...man too many voices to name them all
    OS Win XP, 7, 8, 8.1 and Windows 10 Spyware Edition
    Network Router56k modem
    Accessory #1 Umm...nice tie?
    Accessory #2 Err...belt?
    Accessory #3 3 accessories?! I'm not a girl!!
    Arne Saknussemm's Avatar
    Join Date
    Apr 2012
    Reputation
    481
    Posts
    13,400

    OK GoNz0...see how you go

Page 24 of 25 FirstFirst ... 14 22 23 24 25 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •