09-10-2014 08:08 AM - last edited 3 weeks ago by ROGBot
09-10-2014 09:03 AM
09-10-2014 09:17 AM
09-10-2014 07:09 PM
09-11-2014 04:37 AM
09-11-2014 05:57 AM
tistou77 wrote:
Thank you for these explanations, although I don't understand everything, with my bad English 🙂
09-11-2014 07:20 AM
10-08-2014 06:10 PM
Raja@ASUS wrote:
... Now if this post does not give you any more insight or idea, I need to find a new job and you guys need to find a new hobby! 😄
01-14-2018 02:13 AM
Raja@ASUS wrote:
Its easy Myk. I don't have time to do the whole lot for you but here goes.
Look at what happens to DRAM frequency when you change the strap - the same divider is used. Offsetting the BCLK increases the frequency on the same DRAM ratio!
2400 on 100 strap becomes DDR4-3000 on 125 strap
2133 on 100 strap becomes DDR4-2666 on 125 strap
such ratios are GOOD.
You can apply this to the bad ratios on 100 and find out which frequencies are bad on 125. Look at shammy's post and try it out.
Do this. Set 100 Strap. Select the 2400 ratio. Type in 125 BCLK in the bclk setting. See what it becomes? DDR4-3000. When you go to the 125 strap thats all that happens. We know the 2400 ratio is a good ratio. There for DDR4-3000 on the 125 strap is stable also.
Now if this post does not give you any more insight or idea, I need to find a new job and you guys need to find a new hobby! 😄
01-15-2018 07:03 AM
Arne Saknussemm wrote:
OK...so I just re-read this and finally understood it 😮
Since this thread started RAM frequencies have obviously moved onwards and upwards from the range discussed....what are the good ratios for frequencies north of 3200?