Results 1 to 7 of 7

Threaded View

  1. #1
    New ROGer Array
    Join Date
    Oct 2014

    Can the RVE use Fan Xpert3 to control the Thermaltake Water 3.0 Extreme?


    I am in the middle of a new build using the Rampage V Extreme and a Thermaltake Water 3.0 Extreme cooler. I am intrigued with the idea of using the Asus Fan Xpert 3 fan control software coupled with the included OC panel to monitor temps.

    But when installing the Water 3.0 cooler, I noticed that the connectors are one 3-pin fan connector and one USB 9-pin (Or 10-1) connector.

    So the question I have is will the Fan Xpert 3 software recognize and effectively control the Water 3.0 and its fans, or will I be stuck using the Thermaltake software and the need to remove the now worthless OC panel?

    Would it be better to decouple my PWM fans I installed on the radiator from the Water 3.0 harness and put them directly on the CPU and CPU-OPT fan headers, while putting the Water 3.0 connectors in the USB and a side fan header?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts