Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    TeamROG Array V2-V3's Avatar
    Join Date
    Mar 2010

    ROG Overclocking Handbook

    Rog rule book for overclocking.pdf

    The goal of this book is to condense the knowledge of Over-clocking into an easy to use reference book for anyone who is looking to squeeze a few more frames from their favorite game or that aspiring extreme over-clocker!

    Ok, so what exactly is Over-clocking?
    Overclocking is the process of running a computer chip at a higher clock rate (speed) than it was designed for, gaining an increase in the performance of the computer.

    Why Over-clock?
    most users over-clock rather than purchase new hardware components to keep pace with new software requirements, For example over-clock low-end computer components to higher clock rates equal to or greater than the high-end more expensive components recommended by the game manufacturer.

    What can be over-clocked?
    People who overclock their components mainly focus their efforts on processors (CPU), video cards (GPU), motherboard chipsets, and random-access memory (RAM). It is done through manipulating the CPU multiplier and the motherboard's front side bus (FSB) clock rate until a maximum stable operating frequency is reached, although with the introduction of Intel's new X58, and P55 chipsets and the Core i3,i5,i7 processors, the front side bus (FSB) has been replaced with the Baseclock (BCLK)
    and QPI (Quick Path Interconnect);

    The Concept of Over-clocking
    While the idea of over-clocking is simple, variation in the electrical and physical characteristics of computing systems complicates the process. CPU multipliers, bus dividers, voltages, thermal loads, cooling techniques and several other factors such as individual semiconductor clock and thermal tolerances can affect it. Every component has its unique limits with higher clocks and voltage. Two identical CPUs may clock completely differently, one being stable with higher clocks at a similar temperature as the other. The bus and memory stability and tolerances also affect how stable an over-clock can be.

    Mainstream Overclocking

    Board Terminology

    Printed Circuit Board, this multi layer sheet contains layers of circuits "wires" that interconnect all of the components, chips and connectors soldered to the surface of the board.

    Power Phase:
    Phase is commonly referenced to as a CPU voltage regulator module. A voltage regulator creates an output voltage requested by the CPU (Usually in the range of 1-2 volts) by converting the +12V power from the system power supply.
    These VRM's contain a number of buck converters, each generating the same voltage and a split of the total output current. Each converter usually consists of 2 or 3 switching MOSFET transistors, one coil and at least one capacitor, plus the driver section which can be a separate SMD or included in the main PWM controller. The buck converters do not work simultaneously but alternate with an equal delay between each others switching, this is why the converter is also called "a phase".
    There are many advantages for using multiple power phases, the most important being a reduction in required output capacitor size. Each converter "Phase" takes it's turn switching, making the output ripple frequency much higher due to phase interpolation. For example, if we have a converter that works at 500Khz, for a single-phase we would have 500Khz ripple, but for a 4-phase system the ripple would be at 2000khz, this would allow capacitors of 1/4 the size to be used to filter the power. Another advantage of the phase interpolation process is a much faster voltage load response. One advantage is the current distribution, power is drawn from multiple sources lowering current draw on each phase and distributing the heat generated over a larger area. One drawback to multiple phase designs is the increased generation of EMI caused by the very high-frequency ripple, better capacitors such as Japanese solid capacitors are required for output filters. DPWM "Digital Pulse Width Modulation" regulator modules are able to switch at very high frequencies generating very little heat by using extremely efficient ceramic capacitors.

    NVIDIA nForce 200 MCP "nF200":
    The nForce 200 chip was created as a means of providing SLI functionality to Intel chipsets needed to ensure 4-Way SLI would have full 16x PCI express graphics lanes available to each graphics card.

    Serial ATA (SATA or Serial Advanced Technology Attachment) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA was designed to replace the older ATA (AT Attachment) standard (also known as EIDE), offering several advantages over the older parallel ATA (PATA) interface

    BIOS Terminology

    measured in MHz
    Base Clock Increasing your base clock increases your CPU core clocks, memory speed, QPI frequency, and North Bridge Frequency
    -Similar to the older FSB “Front Side Bus”
    BCLK x CPU ratio = CPU frequency
    Adjust the BCLK frequency to overclock the CPU speed!

    -Multiplier is a ratio that determines the clock speed for the CPU based on the multiplication of the BCLK. For example, your CPU multiplier determines what your CPU core clock speed is using this formula: Base clock * multiplier
    There are also multipliers for Memory frequency, QPI speed, and North Bridge (UCLK) frequency.

    measured in MHz
    Periferal Connect Interface Express
    -Video Graphics communication link
    when overclocking, increasing the PCI-E clock can help with stability when above 200MHz BCLK

    CPU Voltage
    AKA -VCore this is your processor core voltage. Increasing this will supply your CPU cores the power they need to operate at higher frequencies.
    Central Processing Unit
    -Processor core voltage
    DO NOT EXCEED 1.55v

    IMC Voltage
    "VTT" or "QPI" Increasing this will supply the power needed for the IMC (North Bridge) to operate at higher frequencies.
    - L3 shared cache
    - memory controller
    - processor I/O power rail
    Since memory controller frequency is dependent on BCLK, the higher the BCLK, the higher the IMC voltage required. DO NOT Exceed 1.45v

    DRAM Voltage
    DDR3 Random Access Memory
    -Memory Voltage
    Since DRAM speed is linked to the BCLK the higher the BCLK the higher the DRAM Voltage is needed

    CPU PLL Voltage
    PLL: Phase Locked Loop voltage
    - Processor/IMC(Integrated Memory Controller)/other internal clock cycles
    - Clock multiplying of processor is provided by an internal Phase Locked Loop
    Does not have a significant effect on CPU Speed, -DO NOT Exceed 1.90v

    PCH Voltage
    Platform Controller Hub
    - main I/O interface for CPU
    - display connectivity
    - Integrated Audio
    - power management features
    - Storage features
    The higher the CPU frequency, the harder the I/O (input and output) has to work so there is higher power consumption and more heat is generated, raising the CPU temperature. The PCH voltage needs to be increased in order to stabilize I/O signaling. DO NOT EXCEED 1.25v

    I/O Controler Hub or South Bridge chip
    PCIe ports: usually 1x 2x 4x
    PCI Bus
    SATA ports, eSATA ports
    Intel Audio
    integrated LAN Port
    USB Ports

    In computing, input/output, or I/O, refers to the communication between an information processing system (such as a computer), and the outside world, possibly a human, or another information processing system.

    Extreme Overclocking

    Cooling Terminology:

    Cold Bug: CB or Freeze Lock
    The below zero operating temperature at which the CPU locks up and becomes non responsive

    Cold Boot Bug: or CBB
    The minimum temperature the CPU can bee at to successfully turn on or POST from an off state.

    A type of heatsink used for Liquid Helium, Liquid Nitrogen, and Dry Ice cooling

    Phase Cooling:
    The use of a Mechanical refrigeration system similar to a home freezer or refrigerator to cool a microprocessor below room temperature
    Last edited by _; 02-22-2012 at 04:26 AM.

  2. #2
    MIA ROG Guru Array
    Join Date
    May 2010

    Nice V! That's a simplified handbook even a noob like myself can use! Thanks

  3. #3
    TeamROG Array V2-V3's Avatar
    Join Date
    Mar 2010

    not even close to being done, this will be an all inclusive handbook

  4. #4
    MIA ROG Guru Array
    Join Date
    May 2010

    Nice! Off to an excellent start!

  5. #5
    TeamROG GirlGamer Array Kaboom's Avatar
    Join Date
    May 2010

    I'm really liking where this is going. So far, so good! As far as cpu voltage limit I would even say not to go past 1.6... or 1.55. My rig at Blizzcon couldn't even handle 1.55 on H50 (although H50's aren't the greatest cooling lol).

  6. #6
    ROG Enthusiast Array
    Join Date
    May 2011

    It would be nice to see some more addition made to this. Possibly separate it into two parts for classic overclocking and for the new Core i overclocking. Intro with terms common to both of them.

    Good job so far though.
    Case: Antec Twelve Hundred
    PSU: Antec CP-850
    CPU: Core 2 Quad Q6600 2.4GHz
    GPU: NVidia GTX 260 Core 216
    RAM: Corsair DHX 8GB DDR2 800MHz 6400C5DHX

    "From whom much is given, much is expected."

  7. #7
    Six Foot Ginger
    I agree with Junkie this is a really start for new over clockers

  8. #8
    TeamROG Array V2-V3's Avatar
    Join Date
    Mar 2010

    Updating handbook, Please feel free to make any suggestions

  9. #9
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2012

    oops wrong post
    CPU: Intel Core i7-3770K
    GPU: AORUS GeForce RTX 2070 SUPER 8GB
    Mobo: Maximus V Formula
    RAM: G.Skill RipjawsZ 32GB DDR3
    Cooler: Noctua NH-D14
    Disk: SSD 1.5TB
    Disk: HDD 2TB
    PSU: Seasonic Platinum 1000W
    Display: Samsung Odyssey G7 QLED 27", 1ms, 240hz, 1440p, 10-bit, HDR600
    Speakers: KRK RP7 G4

    Laptop - Asus ROG GL702VS-GC198T
    CPU: Intel Core i7-7700HQ
    GPU: GeForce GTX 1070 8GB
    Display: 1920x1080 @75Hz, IPS, G-Sync, 1ms
    RAM: 16GB DDR4
    Disk: M2 SSD 256GB
    Disk: HDD 1TB

  10. #10
    ROG Guru: Orange Belt Array JimmyH PC Specs
    JimmyH PC Specs
    MotherboardROG Strix Z370-E
    Memory (part number)CMK32GX4M4B3200C16
    Graphics Card #1ASUS STRIX GTX 1080
    MonitorBenq 27" x 2
    Storage #1Samsung 970 EVO
    CPU CoolerThermaltake Floe Ring 360
    CaseThermaltake View 71
    Power SupplyCorsair RM 850x
    Keyboard Strix
    Mouse ROG Pugio
    Headset Logitech933
    OS Windows 10 Pro
    JimmyH's Avatar
    Join Date
    Nov 2012

    Quote Originally Posted by V2-V3 View Post
    not even close to being done, this will be an all inclusive handbook
    OK, off to a great start. Now I understand the terminology a bit more. Can you guide me to where it explains step by step how to actually OC.

    CPU i7 8700K: MB: ROG Strix Z370-E Corsair Vengeance 3000 (4x8GB) : GTX-1080: Samsung 970 EVO, 2 x Kingston Hyper X
    500GB Velocerapter, PSU Corsair RM 850x
    Case Thermaltake View 71: Cooling Thermaltake Floe Riing 360 mm

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts