Results 1 to 1 of 1
  1. #1
    New ROGer Array lingaraju06 PC Specs
    lingaraju06 PC Specs
    Laptop (Model)Dell 5559
    ProcessorI9 10920x
    Memory (part number)CMK16GX4M2D3600C18
    Graphics Card #1EVGA RTX 2080TI FTW3 ULTRA
    Graphics Card #2ASUS ROG STRIX RTX 2080TI OC
    MonitorLG 27GL83A
    Storage #1Adata xpg 8200 pro 1tb
    Storage #2Samsung 970 pro
    CPU CoolerEkwb waterblock
    CaseThermaltake core x9
    Power SupplyEvga 1600w t2
    Keyboard Razor rgb gaming
    Mouse Logitech g pro
    OS Windows 10 1909 64bit
    Network RouterArcher c5400

    Join Date
    Jan 2020

    Question Bios error 9c when overclocking.

    So i have asus rog rampage vi extreme omega x299 mobo with i9 10920x cpu, 4x8gb 3600mhz corsair ram, evga rtx 2080ti ftw3 gpu, evga t2 1600w psu, system works fine on stock and xmp settings also works just fine, i was trying to get stable oc with per core settings of 46 @1.235v for 10 cores and 48 @1.255v for 2 performing cores that have a star next to them in bios and on reboot it stops at b4 for few seconds and then stops at 9c and says vga bios laoding and upon further reading it might be due to vccsa or vtt voltage being low but nowhere could i find what is a aafe voltage for vccsa and vtt (although vtt is mostly memory controller i believe) and if i press reset button it starts over again and hangs some memory error even though there is nothing wrong with memory, and if u power off at the wall socket and put pkug back in and power in again i am stuck at 9c vga bios loading which leads me to think vccsa or system agent but i dont have that much knowledge is dealiing with voltages for them, can someone point me a safe voltage other than trying to increment by .10v as i am not sure what i am doing and dont want to damage board or cpu, thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts