Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    Dec 2014
    Reputation
    10
    Posts
    8

    R9 290X MATRIX Backout.

    Hi

    I just installed a R9 290X MATRIX, and it runs completely fine until i enter a game the logo on the card turns red and screen flickers, next thing Boom black screen.
    all my drivers are up to date and the rig is as follows

    Crosshair V Formula-z
    AMD FX 8350
    8GB Crosshair Vengance @1886 mhz
    and ofc ASUS R9 290X Matrix

    Please Help

    Thankyou

  2. #2
    ROG Member Array
    Join Date
    Dec 2014
    Reputation
    10
    Posts
    8

    Update, the card does it with battlefield 4 but not with world of warcraft, could it by my 800 watt psu is to small?

  3. #3
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    Should be enough, card can pull up to 375watt at factory clock.
    Red logo = 100% load
    >If you use displaylink cable try lower res, some displaylink cables are too poor quality.
    >Another thing to try is to uninstall drivers with DDU if you have not tried already http://www.wagnardmobile.com/DDU/,
    and then reinstall latest.
    >Is memory underclocked in 2D mode? Mine is same in 2D and 3D. If it does so, maybe that is the issue.
    Try set same voltage and frequency for memory on 2D and 3D with GPU Tweak.
    >Last thing I can think off if above dont work, is to use MSI afterburner and try tag "force constant voltage" within settings.
    Last edited by Mikan02; 12-17-2014 at 03:37 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •