©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

shiromar · ‎12-15-2014

Please anyone out there help or point me in the right direction. Am I bad or is MB bad. This is the first time I've ever had an issue with a Asus MB

I have a MAXIMUS VII HERO, I use for work and play, for work I use a chromebook and Chrome Remote in to do the heavy lifting. Sometimes I can't log in and for a while I just kept thinking the power was going out or something.

So I realized that when I turn off my monitor "PB278Q" and turn it back on I keep getting a Nvidia Display Driver has crashed but has recovered. (Asus GTX 780).

So it recovered, okay that's fine w/e. Sometimes it would not recover and turning on my monitor would cause the system to restart not fine.

The powersettings are set to

Turn off the Display: NEVER
Put the computer to Sleep:NEVER
Turn off hard disk after: NEVER
Sleep After: NEVER

At first it would seem related to the GPU, I tried it on another MB, z87-pro and it works flawlessly.

I tried uninstalling drivers and did a deep uninstall with "Display Driver Uninstaller"

Even if turn off the monitor for only a few seconds and turn it back on the system seems to hang before either display has recovered or the system reboots.

Upon a clean reboot this is what I am seeing in the Event Viewer.


Log Name:      System
Source:        Display
Date:          12/15/2014 9:47:04 AM
Event ID:      4101
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      ROG1
Description:
Display driver nvlddmkm stopped responding and has successfully recovered.
Event Xml:

  
    
    4101
    3
    0
    0x80000000000000
    
    17230
    System
    ROG1
    
  
  
    nvlddmkm
    
    
  

Log Name:      System
Source:        Service Control Manager
Date:          12/15/2014 9:45:50 AM
Event ID:      7034
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ROG1
Description:
The Windows Image Acquisition (WIA) service terminated unexpectedly.  It has done this 1 time(s).
Event Xml:

  
    
    7034
    0
    2
    0
    0
    0x8080000000000000
    
    17229
    
    
    System
    ROG1
    
  
  
    Windows Image Acquisition (WIA)
    1
    7300740069007300760063000000
  

Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          12/15/2014 9:45:22 AM
Event ID:      10016
Task Category: None
Level:         Error
Keywords:      Classic
User:          ROG1\amanalar
Computer:      ROG1
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID 
{7022A3B3-D004-4F52-AF11-E9E987FEE25F}
 and APPID 
{ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}
 to the user ROG1\amanalar SID (S-1-5-21-3877662850-2793354048-1569739882-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:

  
    
    10016
    0
    2
    0
    0
    0x8080000000000000
    
    17226
    
    
    System
    ROG1
    
  
  
    application-specific
    Local
    Launch
    {7022A3B3-D004-4F52-AF11-E9E987FEE25F}
    {ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}
    ROG1
    amanalar
    S-1-5-21-3877662850-2793354048-1569739882-1001
    LocalHost (Using LRPC)
    Unavailable
    Unavailable
  

Log Name:      Microsoft-Windows-PrintService/Admin
Source:        Microsoft-Windows-PrintService
Date:          12/15/2014 9:45:22 AM
Event ID:      315
Task Category: Sharing a printer
Level:         Error
Keywords:      Classic Spooler Event,Printer
User:          SYSTEM
Computer:      ROG1
Description:
The print spooler failed to share printer Canon MX890 series FAX with shared resource name Canon MX890 series FAX. Error 2114. The printer cannot be used by others on the network.
Event Xml:

  
    
    315
    0
    2
    30
    12
    0x8000000000000820
    
    65
    
    
    Microsoft-Windows-PrintService/Admin
    ROG1
    
  
  
    
      2114
      Canon MX890 series FAX
      Canon MX890 series FAX
    
  

Log Name:      Microsoft-Windows-PrintService/Admin
Source:        Microsoft-Windows-PrintService
Date:          12/15/2014 9:45:22 AM
Event ID:      315
Task Category: Sharing a printer
Level:         Error
Keywords:      Classic Spooler Event,Printer
User:          SYSTEM
Computer:      ROG1
Description:
The print spooler failed to share printer Canon MX890 series Printer with shared resource name Canon MX890 series Printer. Error 2114. The printer cannot be used by others on the network.
Event Xml:

  
    
    315
    0
    2
    30
    12
    0x8000000000000820
    
    64
    
    
    Microsoft-Windows-PrintService/Admin
    ROG1
    
  
  
    
      2114
      Canon MX890 series Printer
      Canon MX890 series Printer

shiromar · ‎12-15-2014

Log Name:      Application
Source:        Application Error
Date:          12/15/2014 9:45:22 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ROG1
Description:
Faulting application name: svchost.exe_stisvc, version: 6.3.9600.17415, time stamp: 0x54504177
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516b13
Exception code: 0xc0000008
Fault offset: 0x0000000000092b8a
Faulting process id: 0xc68
Faulting application start time: 0x01d01875c0998fff
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: ff1013db-8468-11e4-bef0-000272dc1f28
Faulting package full name: 
Faulting package-relative application ID: 
Event Xml:

  
    
    1000
    2
    100
    0x80000000000000
    
    69699
    Application
    ROG1
    
  
  
    svchost.exe_stisvc
    6.3.9600.17415
    54504177
    ntdll.dll
    6.3.9600.17476
    54516b13
    c0000008
    0000000000092b8a
    c68
    01d01875c0998fff
    C:\WINDOWS\system32\svchost.exe
    C:\WINDOWS\SYSTEM32\ntdll.dll
    ff1013db-8468-11e4-bef0-000272dc1f28
    
    
    
    
  

Log Name:      System
Source:        Service Control Manager
Date:          12/15/2014 9:45:21 AM
Event ID:      7000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ROG1
Description:
The hardlock service failed to start due to the following error: 
This driver has been blocked from loading
Event Xml:

  
    
    7000
    0
    2
    0
    0
    0x8080000000000000
    
    17223
    
    
    System
    ROG1
    
  
  
    hardlock
    %%1275
    68006100720064006C006F0063006B000000
  

Log Name:      System
Source:        Application Popup
Date:          12/15/2014 9:45:21 AM
Event ID:      875
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ROG1
Description:
The description for Event ID 875 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event: 

hardlock.sys

the message resource is present but the message is not found in the string/message table

Event Xml:

  
    
    875
    0
    2
    0
    0
    0x80000000000000
    
    17222
    
    
    System
    ROG1
    
  
  
    
    
    hardlock.sys
    0000100002003800000000006B0300C0000000006B0300C0000000000000000000000000000000006BC7471F968BD146810B342ACD20F470
  

Log Name:      System
Source:        Microsoft-Windows-Kernel-PnP
Date:          12/15/2014 9:45:08 AM
Event ID:      219
Task Category: (212)
Level:         Warning
Keywords:      
User:          SYSTEM
Computer:      ROG1
Description:
The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&2.
Event Xml:

  
    
    219
    0
    3
    212
    0
    0x8000000000000000
    
    17204
    
    
    System
    ROG1
    
  
  
    24
    ACPI\PNP0A0A\2&daba3ff&2
    3221226341
    14
    \Driver\WUDFRd
    0
  

Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          12/15/2014 9:44:44 AM
Event ID:      10010
Task Category: None
Level:         Error
Keywords:      Classic
User:          ROG1\amanalar
Computer:      ROG1
Description:
The server {4AA0A5C4-1B9B-4F2E-99D7-99C6AEC83474} did not register with DCOM within the required timeout.
Event Xml:

  
    
    10010
    0
    2
    0
    0
    0x8080000000000000
    
    17179
    
    
    System
    ROG1
    
  
  
    {4AA0A5C4-1B9B-4F2E-99D7-99C6AEC83474}

Backfire1 · ‎12-15-2014

Do you have this problem using the on board graphics? Out of curiosity why do you turn your monitor off. You can have it turn off automatically in windows under control panel, power options.

shiromar · ‎12-15-2014

i turn off the monitor while i'm at work and chrome remote in to take advantage of the i7 and gpu. this computer alsos hosts plex media server to my tv.
the only time the monitor is on is now, while i'm working or while i'm gaming.

you know whats crazy, i pull out the display port to try onboard graphics and i'm like am i crazy or does this not have a display port for onboard. ok w/e let me plug it back in. when i pluged the DP back in to the GPU no error.

just turned it off and on and there it goes again with that error.
Log Name: System
Source: Display
Date: 12/15/2014 5:53:40 PM
Event ID: 4101
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: HAL-ROG
Description:
Display driver nvlddmkm stopped responding and has successfully recovered.
Event Xml:

4101
3
0
0x80000000000000

17643
System
HAL-ROG

nvlddmkm

Backfire1 · ‎12-15-2014

Can you connect via HDMI or DVI? I run a GTX 970 and 3 monitors and a TV. When I turn off any monitors it does not effect any thing. Also what happened when you only used on board video?

Multiple erros in ev