Results 1 to 6 of 6
  1. #1
    ROG Guru: White Belt Array jarokamaro007 PC Specs
    jarokamaro007 PC Specs
    MotherboardAsus Maximus Hero VII
    Processori7 4790K @ 4.5
    Memory (part number)Corsair Vengeance Pro 32Gb 2133Mhz
    Graphics Card #1Asus R290x Matrix Platinum
    Graphics Card #2Asus R290x Matrix Platinum
    Storage #1Asus RAIDR SSD 240 Gb
    Storage #2WD Blue 1Tb
    CPU CoolerEK Supremacy Evo
    CaseCooler Master Cosmos 2
    Power SupplyEVGA Supernova 1200P
    Keyboard Corsair K70 RGB
    Mouse Logitech G502 Proteus Spectrum RGB
    Headset Logitech G230
    OS Windows 10 Pro

    Join Date
    Dec 2014
    Reputation
    10
    Posts
    79

    Corsair Vengeance Pro 32Gb 2133Mhz Timing set Up?

    Hi.Just would like to ask about SPD and Tested Latency...SPD Latency is 9-9-9-24 and Tested Latency is 11-11-11-27...i seen i can change it manualy in bios...if i change from tested to SPD will they work fine?faster?do i have to change voltages or something?I overclocked my FX-8350 to 4.7 and coul not get my memorry work at more speed than 1920Mhz...Why is that?,i tought they will work at 2133 wit no problem....
    3

  2. #2
    Moderator Array Nate152 PC Specs
    Nate152 PC Specs
    MotherboardROG Maximus IX Code
    Processori7-7700k 5.2GHz Delidded
    Memory (part number)16GB G.Skill Trident Z 4025MHz 17-17-17-39-2T
    Graphics Card #1Titan Xp - EKFC waterblock
    Graphics Card #2Titan Xp
    Sound CardROG SupremeFX 2015
    MonitorHP ZR30w
    Storage #1Toshiba OCZ VX500 256GB
    CPU CoolerSwiftech Apogee GTZ
    CaseThermaltake Armor+ VH6000
    Power SupplyEVGA Supernova 1600w Titanium
    Keyboard Cyberpower Skorpion K2
    Mouse Razer Basilisk
    Headset Sennheiser HD6XX / Modmic 5
    OS Windows 10 Home 64 bit
    Accessory #1 Asus optical drive
    Accessory #2 Koolance ERM-2K3U
    Nate152's Avatar
    Join Date
    Feb 2013
    Reputation
    308
    Posts
    16,382

    The 11-11-11-27 timings should run at 2133MHz.

    Your ram kit supports X.M.P. Go into the bios on the extreme tweaker tab and set the ai overclock tuner to X.M.P. F10 and Enter. Are you able to boot?

    If not you will more than likely need to bump up the vccsa voltage for 32GB.

  3. #3
    ROG Guru: White Belt Array jarokamaro007 PC Specs
    jarokamaro007 PC Specs
    MotherboardAsus Maximus Hero VII
    Processori7 4790K @ 4.5
    Memory (part number)Corsair Vengeance Pro 32Gb 2133Mhz
    Graphics Card #1Asus R290x Matrix Platinum
    Graphics Card #2Asus R290x Matrix Platinum
    Storage #1Asus RAIDR SSD 240 Gb
    Storage #2WD Blue 1Tb
    CPU CoolerEK Supremacy Evo
    CaseCooler Master Cosmos 2
    Power SupplyEVGA Supernova 1200P
    Keyboard Corsair K70 RGB
    Mouse Logitech G502 Proteus Spectrum RGB
    Headset Logitech G230
    OS Windows 10 Pro

    Join Date
    Dec 2014
    Reputation
    10
    Posts
    79

    i changed timings for 11-11-11-27 and its workin fine..i have AMD processor and there is no X.M.P opion(its only for Intel processor i think)but to get them working at 2133 i had to change my procesor frequency to standard 4Gh....what is safe overclock freqency for vengeance pro 2133?and Croshair V Formula MB and NB?cos when i overclock processor then i cant set exactly 2133 Mhz for memmory and NB and MB...now i changed Processor frequency to 4.7 and Memory to 2192Mhz..MB and NB at 2350Mhz....and im able to boot...is that setings safe?Thanks for replies

  4. #4
    Moderator Array Nate152 PC Specs
    Nate152 PC Specs
    MotherboardROG Maximus IX Code
    Processori7-7700k 5.2GHz Delidded
    Memory (part number)16GB G.Skill Trident Z 4025MHz 17-17-17-39-2T
    Graphics Card #1Titan Xp - EKFC waterblock
    Graphics Card #2Titan Xp
    Sound CardROG SupremeFX 2015
    MonitorHP ZR30w
    Storage #1Toshiba OCZ VX500 256GB
    CPU CoolerSwiftech Apogee GTZ
    CaseThermaltake Armor+ VH6000
    Power SupplyEVGA Supernova 1600w Titanium
    Keyboard Cyberpower Skorpion K2
    Mouse Razer Basilisk
    Headset Sennheiser HD6XX / Modmic 5
    OS Windows 10 Home 64 bit
    Accessory #1 Asus optical drive
    Accessory #2 Koolance ERM-2K3U
    Nate152's Avatar
    Join Date
    Feb 2013
    Reputation
    308
    Posts
    16,382

    When you raise the front side bus you raise the ram speed too. A safe overclock is determined by your temps. If your temps are under control at 4.7GHz then that is a safe overclock.

    Sorry guy I can't help you with overclocking your cpu, maybe someone with a crosshair v formula board will chime in or you can start a new thread about overclocking, I'm sure someone will help you.

  5. #5
    ROG Guru: Brown Belt Array NemesisChild PC Specs
    NemesisChild PC Specs
    MotherboardASUS Maximus X Hero (WI-FI AC)
    ProcessorIntel i7 8700K
    Memory (part number)G.Skill F4-3600C16D-16GTZR
    Graphics Card #1Nvidia GTX 1070 Ti FE
    Graphics Card #2Nvidia GTX 1070 Ti FE
    MonitorASUS ROG Swift PG278Q
    Storage #1Samsung 970 PRO 512GB NVMe M.2
    Storage #2WD Black 2TB 7200 RPM 64MB Cache
    CPU CoolerNZXT Kraken X42
    CaseCooler Master HAF 932 Advanced
    Power SupplyEVGA SuperNova 1200 P2
    Keyboard Logitech G910 Orion Spark
    Mouse Logitech G703 Wireless
    Headset Logitech G Pro
    Mouse Pad SteelSeries
    OS Windows 10 Home x64 (UEFI)
    Network RouterLinksys WRT1900AC
    NemesisChild's Avatar
    Join Date
    Sep 2011
    Reputation
    89
    Posts
    1,788

    Manually enter your memory base timings, frequency (2133MHz), and DRAM voltage in your bios.
    And you should bump up the DRAM voltage a notch or two above spec for 32GB to ensure stability.
    32GB will put enormous stress on the CPU IMC, especially AMD, so you may not achieve desirable overclocking results.

    Remember there is little gain by running higher memory frequencies, so if you have to down clock, then so be it.
    Intel i7 8700K@ 5.2GHz (Delidded)
    ASUS Maximus X Hero (Bios 1801)
    NZXT Kraken X42
    G.Skill TridentZ@ 4000MHz CL16 2x8GB
    SLI: 2x Nvidia GTX 1070 Ti FE@ 2025/2025MHz
    OS: Samsung 970 PRO 512GB NVMe M.2
    Storage: Samsung 960 EVO 500GB NVMe M.2
    Storage: 2x Samsung 850 EVO 500GB
    Storage: WD Black 7200 RPM 64MB Cache 2TB
    EVGA SuperNova 1200 P2
    Cooler Master HAF 932 Advanced

  6. #6
    ROG Guru: White Belt Array jarokamaro007 PC Specs
    jarokamaro007 PC Specs
    MotherboardAsus Maximus Hero VII
    Processori7 4790K @ 4.5
    Memory (part number)Corsair Vengeance Pro 32Gb 2133Mhz
    Graphics Card #1Asus R290x Matrix Platinum
    Graphics Card #2Asus R290x Matrix Platinum
    Storage #1Asus RAIDR SSD 240 Gb
    Storage #2WD Blue 1Tb
    CPU CoolerEK Supremacy Evo
    CaseCooler Master Cosmos 2
    Power SupplyEVGA Supernova 1200P
    Keyboard Corsair K70 RGB
    Mouse Logitech G502 Proteus Spectrum RGB
    Headset Logitech G230
    OS Windows 10 Pro

    Join Date
    Dec 2014
    Reputation
    10
    Posts
    79

    yesterday i set cpu clock at 4.7 and memory at 2192...MB and NB at 2350Mhz..after runing prime 95 stress test temperatures of |CPU rich- 78C ,NB- 73C, MB-41C and SB-51 is that normar results wit stress test?after that i lower down CPU clock to 4.58 memory to 2127 and NB MB to auto...and temperatures were maybe 2C lower then before...maybe better if i set up memory clock lower than i have it now?maybe lower them under 2000Mhz?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •