Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Maximus VII Forumla System Device (HDAC) Problem

Thresh
Level 7

‎12-31-2014 02:16 PM - last edited on ‎03-06-2024 03:39 AM by Community Admin

Hi guys,

I have a issue with this High Definition Audio Controller.

Device status:
This device cannot start. (Code 10)

Driver files:
C:\Windows\system32\DRIVERS\hdaudbus.sys

Hardware Id:
PCI\VEN_1002&DEV_AAC8&SUBSYS_AAC81043&REV_00
PCI\VEN_1002&DEV_AAC8&SUBSYS_AAC81043
PCI\VEN_1002&DEV_AAC8&CC_040300
PCI\VEN_1002&DEV_AAC8&CC_0403

Location:
PCI bus 2, device 0, function 1

My system is below:

*********** system hardware ***********
ASUS MAXIMUM VII FORMULA
2 x ASUS R9 290X MATRIX
INTEL i7-4790K
4 X 8GB CORSAIR DOMINATOR 2133Hz
CORSAIR NEUTRON GTX SSD
BENQ XL2411Z MONITOR
*********** system hardware ***********

Running Windows 7 Ultimate 64bit

44794

This problem never occur before and I haven't install any drivers recently. I don't know which device is causing the issue, I know its a HDAC device but I don't know which one.

There is sound processing but it coming from a bluetooth device.

Any help would be great and much appreciated.
Labels:
0 Kudos
3,698 Views
4 REPLIES 4

Thresh
Level 7

‎12-31-2014 02:43 PM

Ok, I just disable one of my graphics cards and the issue disappeared but I comes back once I reboot. I think the R9 290X Matrix HDMI audio is conflicting with the motherboard HDMI audio or the 2nd R9 290X Matrix.

Any ideas guys?
0 Kudos

Thresh
Level 7
In response to Thresh

‎12-31-2014 02:46 PM

Thresh wrote:
Ok, I just disable one of my graphics cards and the issue disappeared but I comes back once I reboot. I think the R9 290X Matrix HDMI audio is conflicting with the motherboard HDMI audio or the 2nd R9 290X Matrix.

Any ideas guys?


That wasn't true, I had the HDAC disable that's why it looked like the issue was resolved. hmmmmm... continue to look.
0 Kudos

Thresh
Level 7

‎12-31-2014 02:59 PM

I just disable both of the graphics cards and done a restart and the code 10 went away but when I re-enable them and done a restart they came back. So I think it has to do with something with the graphic cards conflicting?
0 Kudos

Nepty
Level 9

‎02-05-2015 10:22 AM

Got the same problem, I don't know how to fix this.
Thought it might be HDMI driver. But going to try some stuff.
MOBO | ROG MAXIMUS XII FORMULA
CPU | Intel i9-10850K
COOLER | Corsair iCUE H115i ELITE CAPELLIX's)
RAM | G.Skill Trident Z DDR4 64GB 3200Mhz (3800MHz OC) (F4-3200C14D-32GTZR)
GPU | ASUS ROG Strix LC RTX 4090 OC
HDD | Kingston FURY Renegade e M.2 2TB
PSU | ASUS ROG THOR 1200
CASE | ASUS ROG Strix Helios White
OS | Windows 11 Pro 64bit
Monitor | Asus 48'' 4K PG48UQ x2
0 Kudos