Results 1 to 4 of 4
  1. #1
    New ROGer Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    2

    CMY16GX3M2A2400C11R on ROG Maximus Extreme VI

    Hi, I just buy 2 corsair CMY16GX3M2A2400C11R pro series kits (2x8 gb each) and installed on my ROG Maximus extreme VI but didn´t start my pc. Only Recognize on B1 and B2 slots. Am I doing something wrong? Any sugestion? Thanks

  2. #2
    ROG Guru: Brown Belt Array MeanMachine PC Specs
    MeanMachine PC Specs
    Laptop (Model)I enjoy my wife
    MotherboardCVI HERO + CVII Hero Wifi
    ProcessorRyzen 7 1800X + 2700X
    Memory (part number)CMD16GX4M2B3000C15 + F4-3200C14D-16GTZR
    Graphics Card #1EVGA GTX980 SC for CVFZ
    Graphics Card #2EVGA GTX 1080 hybrid
    Graphics Card #3GTX 770 for phys x
    Sound CardMB
    MonitorHP w2408h
    Storage #1Samsung 970 EVO 500GB M.2
    Storage #2Samsung 840EVO 500GB and 960 M.2 pro
    CPU CoolerCorsair H105, H110 and H115i
    CaseCorsair 750D and 780T
    Power SupplyCorsair AX-1200i and Antec 850 pro platinum
    Keyboard Logitech K800
    Mouse Razer Mamba
    Headset Corsair Vengeance 2100
    OS W7 Ultimate 64bit and W10 pro 64bit
    Network RouterNetcom Wireless NF18ACV
    MeanMachine's Avatar
    Join Date
    Apr 2014
    Reputation
    126
    Posts
    1,675

    Hi Diover and Welcome to ROG

    If I am to understand you correctly Diover, You purchased two separate kits of 8GB and this is where you have erred.
    Even two identical kits of the same spec when put together can cause an error.
    If your system runs fine with just one of the DIMM kit in the first and third slot then this will be your problem.
    Recommend you return your modules and exchange for 16GB in a single kit 2x8 or 4x4.

    MM
    We owe our existence to the scum of the earth, Cyanobacteria

    My System Specs:

    MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
    CPU:
    AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t

    Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2



  3. #3
    New ROGer Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    2

    Thank you for your answer. According to the user manual the dimm slots are: A1 (1st), A2 (2nd), B1 (3rd) and B2 (4th). Installing 1 kit on slots 1st and 3rd doesn't start the pc. Same with 2nd and 4th slot or 1st and 2nd slot . Only with memory modules on 3rd and 4th slot start the PC. Whit 1 single module installed only works if it is on 4th slot.

  4. #4
    ROG Guru: Blue Belt Array jab383 PC Specs
    jab383 PC Specs
    Motherboard24/7 rig : Maximus VI Extreme
    Processori7 4790K
    Memory (part number)16GB Mushkin Redline 2400 10-12-12-28 + 16GB Corsair Vengeance 2400 10-12-12-31
    Graphics Card #1AMD Firepro W5000
    Sound CardM6E Supreme FX
    MonitorDell U2413
    Storage #1Kingston SH103S3240G SSD
    Storage #2Seagate ST1000DM003 1TB
    CPU CoolerCustom water loop, Delidded, Liquid Metal TIM
    CaseCoolerMaster HAF XM
    Power SupplyCorsair HX-750
    Keyboard Logitech G710+
    Mouse Logitech M705
    OS Windows 7 64 Pro
    jab383's Avatar
    Join Date
    Feb 2014
    Reputation
    107
    Posts
    848

    The Corsair part number CMY16GX3M2A2400C11R is for a single kit of 2 sticks, total 16GB. That pair should work in slots A1 and B1 (check the M6E manual, it might be A2 and B2). In my experience, the Haswell IMC (integrated memory controller) is good enough to handle about anything in the 2400MHz range.

    A systematic way of troubleshooting is to try one stick at a time and try it in each socket. Be sure that one stick is fully seated. In this case I expect to get the same result - good in channel B, but not in A.

    A common cause of one bad channel is that some CPU socket pins are not making contact with the pads on the bottom of the CPU. I suggest removing the CPU, checking for bent pins, and reinstalling the CPU. Be sure to tighten whatever cooler is used only enough to be in firm contact with the CPU. Too much cooler pressure is one cause of socket pins getting misaligned.

    Another possibility is that the CPU is bad. I have one like that (with no warranty since it's delidded) in which channel A memory doesn't work. It is also possible that the motherboard has a problem. Did the PC ever work? In what combination? Do you have another CPU to try as a means of assigning fault?

    Jeff

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •