cancel
Showing results for 
Search instead for 
Did you mean: 

system switching off after a few seconds... with video

Barlos
Level 7
Hi, built my system a few days ago and earlier today it started doing this...
http://youtu.be/HUC0E0P851M

Spec is
Rampage V
5960
16gb 3200 dominator platinum
Gtx 760
Mushkin Scorpion deluxe
Seasonic psu


Any ideas?
6,347 Views
14 REPLIES 14

coyi1895
Level 10
Move the graphic card to PCI-e_X16_1 which is the top one next to the RAM.

It works like this:

One graphic card in PCI-e_X16_1

Two graphic cards in PCI-e_X16_1 and PCI-e_X16/X8_3

Three graphic cards in PCI-e_X16_1, PCI-e_X8_2 and PCI-e_X16/X8_3

Four graphic cards in PCI-e_X16_1, PCI-e_X8_2, PCI-e_X16/X8_3 and PCI-e_X8_4

Barlos
Level 7
Will that fix my problem?

coyi1895
Level 10
Hopefully it should because the configuration is wrong. Turn to page 1-19 of your manual and it show the PCEI_X16_1 is the slot for a single card set up.

Chino
Level 15
Barlos wrote:
Hi, built my system a few days ago and earlier today it started doing this...
http://youtu.be/HUC0E0P851M

Spec is
Rampage V
5960
16gb 3200 dominator platinum
Gtx 760
Mushkin Scorpion deluxe
Seasonic psu


Any ideas?


Clear your CMOS using the button on the back. See if your system will post then.

Barlos
Level 7
Hi, tried that. Absolutely no difference.

Barlos
Level 7
Cleared CMOS and it has booted in the BIOS, hopefully it will be fine.

Barlos wrote:
Cleared CMOS and it has booted in the BIOS, hopefully it will be fine.


Correct. I want you to disconnect the Mushkin Scorpion deluxe for now. Does it post without it?

Barlos
Level 7
Oh, and thanks 🙂

Barlos
Level 7
I'll check, it's gone back to the bd code and not posting.