Results 1 to 2 of 2
  1. #1
    ZoinksS2k
    Guest

    Maximus IV Ext-Z - Max 6GB ports for RAID?

    Greetings, long lime lurker, first time poster.

    I recently purchased 4x 120GB Vertex 3 SSD's which are all SATA III devices. I'm about to upgrade my moboard with the Asus Maximus IV Extreme-Z from a first-gen P8P67 Evo that I never RMA'ed.

    There are 4x SATA III\6GB ports on the Maximus. Will I be able to use the split controllers and setup a 100% SATA III, 4-member RAID0 volume on these ports?

    I setup these 4 drives on the Evo with two on the 3GB ports and 2 on the 6GB ports via the Intel Option ROM. Throughput when from ~850mbs to 1,000 compared to when I had all 4 on the 3GB ports. Regardless of bus saturation, I'll like to go all 6GB.

    I have an LSI 9212-4i4e I can use to do this, but this is for a home gaming system and I want to boot as quickly as possible. The LSI's BIOS initialization takes about 60 sec, so I'd prefer to use the Intel FakeRAID. Performance deltas should be minimal for my type of workload.

    Any help would be appreciated.

  2. #2
    Cogito
    Guest
    Does no one have an answer? I would reaaaally love to know this before I buy one. Thanks!

Similar Threads

  1. Problem with SSD raid 0 on Asus Maximus IV Extreme-Z
    By Ghost in forum Other Series Motherboards
    Replies: 1
    Last Post: 10-28-2011, 04:05 PM
  2. Replies: 2
    Last Post: 07-26-2011, 04:51 PM
  3. Replies: 4
    Last Post: 07-03-2011, 07:50 PM
  4. Maximus Gene-Z Sata-Ports
    By knuF in forum Other Series Motherboards
    Replies: 0
    Last Post: 06-30-2011, 05:05 AM
  5. SSD Raid 1 + HDD Raid 1 on Maximus IV Extreme-Z. Suggestions?
    By SSDRaider in forum Other Series Motherboards
    Replies: 4
    Last Post: 06-28-2011, 05:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •