Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 39
  1. #1
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    [Project Log] "Parvum|Beast"

    [CENTER]
    It's Build Time Again !!

    Hi Guys,
    Build log of my Parvum|Beast build

    FINAL IMAGES ARE UP
    !!!! - FINAL SHOTS - !!!!

    HERE'S A TEASER FROM THE FINAL IMAGES


    Here's Why i ended up building a monster energy drink Tribute machine.


    Well the reason why the monster logo and name plate is used in this build is because the Monster Blue Energy Drink, and Monster Gaming Army is what inspired this build..

    Actually came up with the idea when i was googling the black/blue parvum systems s2.0 case, and was drinking my Blue Monster energy drink.
    And have been wanting to build in a Parvum case for quite some time.
    So I thought to myself, wth, why not build a parvum case inspired by the monster energy drink, and make it look Beastie ..
    I mean, people build tribute mods to all kinds of stuff, so why not build a monster tribute machine

    So please dont judge me for building a Monster tribute Machine, Instead enjoy the level of detail and effort i put into this build



    below is the link to the post with a few pics of the original S2.0 case,
    And the 3d renderings of the final design we made
    Big Thumbs Up to Justin and the rest of the crew at Parvum Systems for this,
    such great work and such great details !
    These guys can make ANYTHING in Acrylic ! <3

    Everythig in this little beast is going to be watercooled with parts from EKWB.com, and Coolerkit.dk
    And all the PSU sleeving is from MainframeCustom.com


    Here's a little teaser of what's allready been done, and more to come Enjoy


    -------------------------------------------------------------------------------------------------

    Progress Links :

    Parvum|Beast Renders
    Parvum|Beast Case Parts
    Parvum|Beast Assembling The Case
    Parvum|Beast The Hardware
    Parvum|Beast Part 1 of the Watercooling parts
    Parvum|Beast Part 2 of the Watercooling parts
    Parvum|Beast The Fittings
    Parvum|Beast The Sleeving Has Arrived
    Parvum|Beast The Polishing Of EKWB Waterblocks
    Parvum|Beast The Liquid & Light Test
    Installing the waterblocks
    Test Mounting of the Waterblocks, and modding the flipped GPU.
    Silverstone AP121 Fans Are Here!
    Figuring out the Loop
    Reservoir Vinyl Sleeve
    Re-Sleeving the fans, and extra sleeving arrived
    Some More Sleeving, 24pin, 2 x 8pin and more
    Finished Filling The Loop!!!
    Cable routing, res change and M logo on GPU
    Done Routing cables, Trying out blue Mesh
    -------------------------------------------------------------------------------------------------

    Status Updates :

    THE BEAST IS FINISHED!!! FINAL IMAGES ARE UP!!!!

    -------------------------------------------------------------------------------------------------

    Specs for the Parvum|Beast :

    • Mobo: Asus Maximus VI Gene z87

    • CPU: Intel Core i7-4790k

    • PSU: Corsair AX1200i

    • Memory: 32 GB of HyperX "Beast" 2133MHz (Obviously )

    • GPU: Asus GTX 690 4GB

    • SSD's: 120GB Samsung Evo 840, 2 x 250GB Samsung Evo 840


    Extra's

    • Monitor: Asus Swift PG278Q 27" 2560x1440 144hz

    • Keyboard: Roccat ISKU FX

    • Mouse: Razer Deathadder Chroma

    • Headset: Logitech G430 7.1 Surround


    Watercooling Parts :

    • Radiators: EK-CoolStream PE 360, and EK-CoolStream PE 120

    • Cpu Block: EK-Supremacy EVO - Nickel (Original CSQ)

    • Gpu Block: EK-FC690 GTX - Nickel (Original CSQ)

    • Mobo Block: EK-MOSFET ASUS M6G - Nickel (Original CSQ)

    • Memory Blocks: EK-RAM Monarch X4 - Nickel CSQ and 2 x EK-RAM Monarch Module - Black (2pcs)

    • Fittings: Some EK-HDC Fitting 12mm G1/4 - Nickel, EK-AF Angled 2×45° G1/4 Nickel, EK-AF Angled 45° G1/4 Nickel and some EK-AF Angled 90° G1/4 Nickel

    • Tubing: Some EK-HD Tube 10/12mm 500mm (2 pcs)

    • Pump: XSPC Laing DDC-1T Pro 3.1 (10W) and EK-DDC X-TOP CSQ - Plexi or a Xres Top depends on what looks best

    • Reservoir: EK-RES X3 250, or EK-RES X3 150 or EK-RES X3 110, depends on what looks best


    PSU Sleeving :

    • Sleeving: LC TELEIOS 4MM SLEEVE and LC TELEIOS 8MM/SATA SLEEVE

    • Cable Combs: Alot of clear LC STEALTH CABLE COMBS

    And off cause a connectors, terminals and LC CUSTOM 18AWG WIRE – BLACK

    And Alot of other cool stuff, Pics will follow

    -------------------------------------------------------------------------------------------------

    This Build is made possible By:









    -------------------------------------------------------------------------------------------------

    Stay Awesome Bro's,

    BeckModz - Liquid Designs
    Last edited by BeckModZ; 04-19-2015 at 08:02 PM.

  2. #2
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Parvum|Beast Design Idea and Renders from Parvum Systems


    Here's the Original Parvum Systems S2.0 and the final render design layout that we agreed on.







    Hope you like the design
    The case has arrived, and i will post pics of the assembly very soon..
    Last edited by BeckModZ; 02-01-2015 at 04:28 PM.

  3. #3
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Parvum|Beast The Parts For The Case


    Here's all the case parts, pics of every single part by it self..















    I am so amazed by the work Parvum Systems has done! Excellent work guys! <3
    Last edited by BeckModZ; 02-01-2015 at 05:49 PM.

  4. #4
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Parvum|Beast Assembling The Case


    Pics of Case assembly, piece by piece.





























    I must say, this turned out even so much more cool then expected !! <3
    Last edited by BeckModZ; 02-01-2015 at 05:58 PM.

  5. #5
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Parvum|Beast Design The Hardware


    Here's pics of all the hardware that's going to get stuffed into this little beast!





















    Next update will probably be of all the watercooling parts <3

  6. #6
    ex-ASUS Support Array Mark@ASUS PC Specs
    Mark@ASUS PC Specs
    Laptop (Model)G771
    MotherboardMaximus Impact VII
    ProcessorIntel Core i7-4790K
    Memory (part number)Corsair DOMINATOR Platinum Series 16GB (2 x 8GB) DDR3 DRAM 2400MHz
    Graphics Card #1STRIX-GTX980-DC2OC-4GD5
    Monitor3xROG SWIFT PG278Q
    Storage #12xSAMSUNG 850 Pro Series MZ-7KE1T0BW 2.5" 1TB SATA III 3-D Vertical Internal Solid State Drive (SSD)
    CPU CoolerCORSAIR Hydro Series H100i Extreme Performance Water/Liquid CPU Cooler. 240mm
    CaseBitfenix Prodigy M
    Power SupplyAX1200i Digital ATX Power Supply — 1200 Watt 80 PLUS® Platinum Certified Fully-Modular PSU
    Keyboard STRIX TACTIC PRO and XBOX One Controller
    Mouse ASUS ROG Gladius 90MP0081-B0UA00 Steel Grey 1 x Wheel USB Wired Optical 6400 dpi Gaming Mouse
    Headset STRIX PRO
    OS Linux (SteamBOX woot) and Windows 7
    Network RouterASUS (RT-AC68U) Wireless-AC1900 Dual-Band Gigabit Router
    Mark@ASUS's Avatar
    Join Date
    Jun 2014
    Reputation
    10
    Posts
    82

    In all sincerity, this is one of the best custom computer builds I have seen in a while. Fantastic work my friend. I can't wait to see the finished product. What inspired you to make this build? How did you come up with it?
    Last edited by Mark@ASUS; 02-02-2015 at 09:56 PM.
    Hi, I have now retired from ASUS support, please refer problems to current @ASUS/cl- usernames.

  7. #7
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Quote Originally Posted by cl-mark@asus View Post
    In all sincerity, this is one of the best custom computer builds I have seen in a while. Fantastic work my friend. I can't wait to see the finished product. What inspired you to make this build? How did you come up with it?
    Thank you so much!
    Still a long way untill its finished, but i am just as excited as you are to see how it ends up
    Well, i've been wanting to build in a parvum case for quite some time, but didnt just wanna go with the standard case design.
    So one day when i was playing Outlast "game is Scary as hell", i was drinking my Blue Monster Energy Drink and took a break from playing.
    I then googled parvum systems s2.0 and saw their Black/blue case, and thought to myself that black/blue case and black/blue monster energy drink. And then i started looking around for some Monster faces "like the one in front", and opened photoshop, and just went crazy trying to come up with something that could look awesome.

    i have to say, what i did in photoshop looked like crap, but lucky for me Parvum Systems knew where i was heading with the design,
    and after a few weeks they send me the first renders. I was SO Amazed with what they had done with my design.
    I then made a few modifications "teeth/mouth thing on window panel" and then gave them the "go ahead" to start cutting

  8. #8
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Part 1 of the watercooling parts


    Here's the first part of all the cool stuff i got from Coolerkit.dk and Ekwb.com






























    So many awesome things came in from theese guys !.. <3

  9. #9
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Part 2 of the watercooling parts


    Here's the second part of all the cool stuff i got from Coolerkit.dk and Ekwb.com, also a reservoir sleeve from redharbinger.com





















    AWESOMENESSSSSSS <3 I love watercooling parts !

  10. #10
    ROG Enthusiast Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    33

    Part 3 of the watercooling parts - The Fittings


    Here's all the fittings that i will be using in the machine,all from Coolerkit.dk and Ekwb.com

























    Next update will probably be either some light teste of the RGB Led's that will be mounted in the case, or some pics of Polishing the Waterblocks

Page 1 of 4 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •