[Scratch Build] "A.G." Handmade chassis ProjectHi, i am Pablo from Argentina and i want to share a tiny log of my handmade pc.
It is made basically from a 6mm aluminium sheet, another of 3mm and an aluminium bar to do the machined spacers
I am always doing some minor tuning to my stuff but always wanted to make a full chassis with custom liquid cooling.
The hardware is:- i7 4770k @ 4.6 ghz delidded with collaboratory liquid pro
- Asus maximus VI formula
- 16 gb DDR3 corsair dominator platinum 2400 mhz
- Ati HD 7750 a bit overclocked (I chose it because at that moment it was the best card that not require external power)
- Corsair CX600M power supply
- 256 gb Samsung 850 pro SSD for the OS
- 128 gb ocz vertex 4 SSD
- 2 Tb WD black for storage
Water Cooling:
- XSPC raystorm cpu block
- XSPC ex240 radiator
- XSPC acrylic DDC tank reservoir multiport
- Laing thermotech DDC 3.25 pump (18 w)
- Bitspower and Enzo black 19/13mm compression fittings
- XSPC high flex black 19/13mm hose
- Corsair air series SP120 quiet edition low noise high pressure
External peripherals
- Dell U2711 (2560x1440)
- Alienware Tactx Keyboard
- Logitech MX performance
- Sennheiser momentum headphones
So here it is:
Measuring with old hardwareMachined spacers
The rest of the componentsThe standReady to assembleTestingFinished at last!Hope you like it