Been working on the O.C. Read the guides on ROG, very new at over clocking. By the way very good guides thank you.

M/Board R4BE
CPU I 7 4930K
V-Core 1.295v
Memory G Skill 2133 MHz 9-11-10-28 @ 1.65v
XMP Profile
Base Clock 100
Multiply per core 45

Tested the O.C. Temps & VID for 15 Minutes using AIDA 64, Real Temp & HW Monitor. Tested the OC for one hour with OCCT to make sure the O.C. was stable.

VID Value Min Maximum

1.226 0.871 1.246

Is this correct to figure the Off Set. Off set seems high may be wrong?

V Core 1.295v - VID 1.246 = +0.049 Rounded to +0.050


In order to pass OCCT Version 4.4.1 Linepack Settings
Have to bump the Offset from +0.050 to +0.060 Is this off set to high?

Had to bump the CPU temps from 92C to 95 C using OCCT. Also tested the temps at a different time 15 minute test with Core Temp & AIDA 64 maximum core temp is 82C. Is this a bad sensor reading from OCCT?

Thank You

LarryA