Front Base Support/Help

[KuAndCo]

Yes i have and it doesn't change anything. Still freeze the Installshield application

I had the same exact issue with Win10 driver on a fresh install
Installed ROGCOnnectPlus and reboot because I thought it was a pre-requisite

then On FrontBase driver install itself,
- I don't know the drawback for this method -

Launch the Setup program ( either the Asus one or the Setup.exe)
Wait it hang
Go in task manager and you should find one of the program in "background tasks"
- can't remeber if that was "axIns" or "aaHMIns"
Right click and terminate the program

Right after this, setup continued,and my Front Base displays correctly CPU speed now
I even installed AI3 right after with no issues

[JemTheWire]

Didn't work for me

[hellboy99]

Now working for me on my Ranger VII with BIOS 2801 and ROG Front Base Driver: 1.01.15

[stricken404]

I fixed mine, finally, after forever of it being broken. This fix is guaranteed to work on all Z97 boards on Win 8.1 and Windows 7 64 bit Home Premium!

Reboot when asked. Use "AsusSetup.exe" versus "Setup.exe" when it's available.

Uninstall the following software: AI Suite 3, Realtek Audio, RoG Connect Plus, RoG Connect.

Go here: https://www.asus.com/us/Motherboard-...Desk_Download/

Select your OS.

Download the following things, and only these:
Under "Audio", download Realtek Audio V6.0.1.7255 (should be the only one on there at the time of writing this)
Under "Utilities", download AI Suite 3 V1.00.79, you'll have to scroll down a bit to find this one. It's from 2014, but I'm certain it works.
Under "Utilities", right below the AI Suite 3 you just downloaded, will be the original FrontBase drivers with RoG Connect bundled with them. Download it. It should be version V1.01.06

Now, install them in the order above. First Realtek. Then AI Suite 3. Then the Frontbase Drivers. Reboot when asked.

On the final reboot after the Frontbase driver installation, once you load into Windows and AI Suite 3 turns back on, it should suddenly show CPU Frequency as something that's accurate now, and
all the buttons like Escape Mode and One-Click OC should all work, as well as fan speed editing. I've confirmed this fix works on the Maximus VII Formula, Maximus VII Gene, and Maximus VII Hero.
I've only tested this on Windows 8.1 and 7 Home Premium 64 bit.

Good luck!

[modelistis]

Thread is old but same thing was happening to me on my new 2017 Pc build (maximus ix formula - i7 7700k - gtx 1080).
Asus front base drivers hang on install and ,no matter what, i was unable to install them for more than a month and have my front base working properly.
I have read many sugestions to correct the problem some of them stated in this thread but none of them worked.

The solution to this problem is in fact much more simple.
Just to clarify, i sucessfuly installed the drivers and got front base working with NO NEED to install anything else, no Asus Aisuite3 , no Rog connect etc... JUST the drivers itself.
Here it goes:
Download the latest front base drivers from ASUS Site.
After download right click in the file and tick the option "unblock" click apply and thats it...
Your drivers should now sucessfuly install with no hangs.

[startekselva]

Guys im having ASUS RAMPAGE V EXTREME installed latest bios while installing front base driver it shows failed to install IO Driver dont know why buy im using the front base since windows 7 after updating to windows 10 installed all driver finally installed Front base driver and it shows error help me guys

[Renikz]

After updating the BIOS (906) ROG STRIX Z270E GAMING on the motherboard and windows 10 (1703) ceased to work correctly. To display the time and name of the motherboard.Journal with errors in the topic
https://rog.asus.com/forum/showthrea...525#post649525
https://rog.asus.com/forum/showthrea...495#post648495

[startekselva]

please follow my
Finally after lot of research found a solution uninstall ROG CONNECT,ROG CONNECT PLUS,FRONT BASE DRIVER reboot the machine FIRST
1.Install ROG CONNECT PLUS DRIVER-SETUP.exe after installation it will ask to reboot the machine after reboot
2.Installl ROG CONNECT DRIVER-AsusSetup.exe Dont install setup.exe after installation reboot the machine
3.Install FRONT BASE DRIVER-AsusSetup.exe Dont install setup.exe it will show ROG Front Base - Fail to install IO driver after installation reboo the machine now everything works like a charm

reply your comments

[purecain]

bloody stupid front base. ASUS GET THE CABLE SORTED OUT. MOST PEOPLE ARE HAVING TROUBLE DUE TO THE CABLE NEEDING TO BE PUSHED INTO THE SOCKET FOR PROPPER CONNECTION. 3 nights and 2 days of my life i'll never get back... I know a lot about front bases though... theres always an upside eh... jebus...

[Bahz]

Since this is the longer running thread, for those who wanted an update regarding ROG Front base support for C6H and other AMD current and upcoming chipsets, I'm sorry to inform you that there will be no support for AMD boards. The ROG front base was designed for Intel architecture boards and unfortunately isn't possible to work without issues on AMD boards. The latest and last chipset that the ROG Front Base will have support for is Z270.