Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

g751 dosent see 2 msata 500gb drives connected to sata adapter

edwin4321
Level 7

‎03-15-2015 10:26 AM - last edited on ‎03-06-2024 03:24 AM by Community Admin

recently purchased 2 840 evo msata 500gb drives and a startech dual msata to sata adapter but g751jt only sees one drive at a time
in bios, not both but it does see both drives when connected seperatley so the drives are good. doesn't matter which msata port their connected to either, so the hardware is good the adapter i mean so why wont it see them both together? any help and have it set up as jbod not raid tried raid only saw 1 drive also
Labels:
0 Kudos
2,333 Views
3 REPLIES 3

X-ROG
Level 15

‎03-15-2015 06:46 PM

What setting is on your jumper pins?

http://sgcdn.startech.com/005329/media/sets/25SAT22MSAT_Manual/25SAT22MSAT.pdf

Have you tried the adapter on another system to check if it's working correctly?
0 Kudos

edwin4321
Level 7

‎03-16-2015 06:15 AM

i think i have the jumpers set correctly but not sure im going through the pdf now its much better than the manual thanks so much will let you know how it goes after i go through it
0 Kudos

edwin4321
Level 7
In response to edwin4321

‎03-16-2015 11:34 AM

ok working great in raid 0 both drives the manual i had didnt say anything about setting to jbod before setting it to raid the pdf you gave me was spot on thanks so much but now i have another question do i leave sata in my bios to ahci or do i change it to raid no idea thanks so much
0 Kudos