Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Problem with a M2 and Windows 7

tistou77
Level 13

‎03-18-2015 01:21 PM - last edited on ‎03-06-2024 03:23 AM by Community Admin

Hello

I have a problems with the SSD M2 and Windows 7 (UEFI)...

I did a fresh install," and at each reboot it freeze on the animated logo of Windows 7 and sometimes BSOD 9C
I stop with the "power" message to boot "OC failed", go into the bios, save and reboot and there it boot without problems

I installed progressively, software, etc... and suddenly, during a reboot, freeze the animated logo (as usual) but then BSOD B7
And every reboot, even BSOD

Is the M2 died?
I was able to access from Windows Live, no worries to navigate the disc, Crystal Disk Info indicates that all is good

If I reinstall Windows 7, no problem with the installation and the next reboot.
I do not understand

A driver problem?
The M2 needs what drivers

If someone has an idea

Thank you 🙂
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus
0 Kudos
7,622 Views
12 REPLIES 12

tistou77
Level 13

‎03-19-2015 01:42 AM

Hello

It's a SM951 and Windows 7 Pro
I reinstall Windows 7 last night (the 4th time), and for the moment no problem

I do not understand
A setting in the bios?

Thanks
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus
0 Kudos

Chino
Level 15

‎03-19-2015 07:45 AM

Perhaps one of your programs is causing conflict with the OS or it can also be a bad Windows install. Happens a lot.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

tistou77
Level 13

‎03-19-2015 07:56 AM

Ok, at the moment it's good... To see 🙂
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus
0 Kudos

tistou77
Level 13

‎03-20-2015 06:31 AM

My friend has no problems with SM951 (for now)
may be a setting in the bios that was done before installing Windows 7 🙂
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus
0 Kudos

BrutalAttis
Level 7

‎03-20-2015 09:58 AM

I've had a similar issue where I got a random freeze at win logo, turned out to be my USB CH Product pedals. I am not sure if more recent BIOS updates fixed that, but it not a bad idea to make sure you only plug in the min. USB devices to make sure its not related to USB. I worked around my issue in the end by just installed and USB card and plugin into any USB devices that were not compatible with this mobo USB implementation. Its was very weird to me that a USB device could cause a freeze at boot logo.
0 Kudos

Randolla
Level 7
In response to BrutalAttis

‎03-20-2015 11:41 AM

BrutalAttis wrote:
I've had a similar issue where I got a random freeze at win logo, turned out to be my USB CH Product pedals. I am not sure if more recent BIOS updates fixed that, but it not a bad idea to make sure you only plug in the min. USB devices to make sure its not related to USB. I worked around my issue in the end by just installed and USB card and plugin into any USB devices that were not compatible with this mobo USB implementation. Its was very weird to me that a USB device could cause a freeze at boot logo.


I tend to agree. Unplug every USB device and see if the problem persists. Plug them back in one at a time. Try using a P/S 2 keyboard
5930K @4.5
ASUS Rampage 5 Extreme X99
16 Gbs Corsair Dominator 2666Mhz RAM
Two, EVGA Nvidia Titan X's in SLI
Samsung XP941 M2 512 Gb M2 boot drive
EVGA SuperNOVA P1200 PSU
Case Labs Merlin Full Tower
NZXT Kraken X61 AiO CPU cooler with four 140mm Noctura Industrial fans
Overlord Tempest O27X Monitor @ 118 Hz
0 Kudos

Saltgrass
Level 13

‎03-21-2015 03:58 AM

Since you are installing Windows 7 in the UEFI mode, make sure you have the SP1 version.

I have not tried Windows 7 with the M.2 Drive, however it is running fine for Windows 8.1
Maximus Z790 Hero,
Intel i9-13900k
Intel BE200
0 Kudos

tistou77
Level 13

‎03-21-2015 06:10 AM

Now that I think, his cell phone was in charge on the PC (connected to a USB3 port)
This mean we can not have a device connected to the PC (USB) when we boot or reboot the PC with a M2?
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus
0 Kudos